Here we go
So this is the drivers side caliper, the right hand side is the front of the car
This is the top of the caliper, see the black plastic cap? The bleed nipple is under that
Flick it up
No get your one man bleed kit
Push the black rubber hose over the nipple
Slide the white plastic retaining clip over the nipple
Use a spanner and undo the bleed nipple half a turn
Open the bonnet remove the cap from the brake fluid resivour, and top it up with your new fluid
Jump in and press the brake peddle to the floor let it up
Look at the clear hose you should have fluid in it
Press the peddle 3-4 times to get all the old fluid out you should notice the new fluid by change of colour in the hose
Ensure the resivour never runs out of fluid keep topping it up
Sent from my GT-I9300 using Tapatalk 2