petrolhead
Member
I don't think the brake fluid has ever been changed so am looking to change.
petrolhead said:Whenever I have changed the pads I only ever do the fronts. The disks on the front look new.
Re specialist equiupment, are you saying this is not a DIY job and is the this because of the ABS system?
Just checked the service record and the fluid was changed in 2011 and 2014, so I may be wasting my time?
Will 1ltr of fluid be enough
Is this right? Is not just as simple as every other car where you crack open each bleed nipple and pump some fluid through.Angie4m said:Well at lest you know the fluid has been changed.
The front pads you will be able to change yourself although if looking to upgrade that pads, especially for track then would probably be best all round. But changing the fluid you probably won't be able to do yourself as, yes they use diagnostics usually to run the ABS pump.
Nictrix said:Is this right? Is not just as simple as every other car where you crack open each bleed nipple and pump some fluid through.Angie4m said:Well at lest you know the fluid has been changed.
The front pads you will be able to change yourself although if looking to upgrade that pads, especially for track then would probably be best all round. But changing the fluid you probably won't be able to do yourself as, yes they use diagnostics usually to run the ABS pump.
I can understand changing the pads on the rear could cause problems but surely changing fluid should be easy.
Learn something new every day.Angie4m said:Nictrix said:Is this right? Is not just as simple as every other car where you crack open each bleed nipple and pump some fluid through.Angie4m said:Well at lest you know the fluid has been changed.
The front pads you will be able to change yourself although if looking to upgrade that pads, especially for track then would probably be best all round. But changing the fluid you probably won't be able to do yourself as, yes they use diagnostics usually to run the ABS pump.
I can understand changing the pads on the rear could cause problems but surely changing fluid should be easy.
This has been the way BMW have done it for a long time now. It's to ensure that all air has been removed from the system by activating the ABS pump. You could try and manually do it but they don't recommend it without using some diagnostics equipment to do it. Oh and they also use a pressure bleeder too.
Incorrect bleeding not only leads to air in the system but the brake fluid is also linked to the DSC which could also be impacted.
You could try bleeding the brakes yourself using the two man method. I'm sure it would work, it's just not recommended