Boot Lid Alarm Microswitch

[BumpyZ4]

I recently installed the factory alarm pieces (Hood switch, Siren, Tilt sensor) and when I was coding the car I noticed that it had an option to turn on the "boot lid contact" in the alarm section of NCS Expert. So I switched it to active but the alarm doesn't work when the lid is opened. I then looked today and there is no micro switch, which is supposed to be mounted on the key lock assembly see attached picture, installed but the wiring is there. For the life of me I cannot find the part number for the microswitch in RealOEM. I was hoping somebody that has the boot lid switch would look at theirs and see if the can find a part number or at least take a picture of it. Thanks!!!

 

[BumpyZ4]

So after 4 days of scouring the internet I found two switches that will work for the Z4. Both switches are from the Z4's kissing cousin the E46. One switch has two microswitches and one switch has one microswitch. The Z4 only needs the switch with the single microswitch but either switch assembly will work as the second microswitch won't be doing anything and the double micro switch assembly are more plentiful.