BMW Z4 E85 Simota carbon fibre induction filter *reduced*

[bedfordboss]

BMW Z4 Simota carbon fibre induction air filter and oil breather filter
used but in good clean condition
will fit most straight 6 petrol BMW's but please check first
These are very rare and very sought after, but if you know what it is your are looking at then you know that anyway.

£120 will consider reasonable offers

collection from mostyn, north wales.
but can post for cost of p+p

 

[Darkangelv2]

Hi
If this will fit my 2.5si N52 - I’d take it for the asking price plus postage please?

 

[bedfordboss]

It should fit yours, the only thing that may be different is the diameter of the maf, if you want to be sure just measure the diameter of your original air box with some verniers and I'll get the diameter of this one

 

[Darkangelv2]

It should fit yours, the only thing that may be different is the diameter of the maf, if you want to be sure just measure the diameter of your original air box with some verniers and I'll get the diameter of this one

Hi, I just checked. It seems the MAF is actually located in part of the original air box so not just a case of bolting on a new filter unfortunately.

I need to pass. Sorry, I’m sure it’ll sell no problems!

 

[bedfordboss]

No problem, the maf on most bmws are attached to the air box via 2 metal clips.

 

[mr.tourette]

think this will only fit pre facelifts unless you can 3d print a new maf holder for si models

 

[Plumby321]

think this will only fit pre facelifts unless you can 3d print a new maf holder for si models

Hi Mr Tourette as you know I’ve been looking for an AFE for a while for my 07 3.0SI e86 would this fit please mate? Or if not is it hard to make fit?

Cheers

 

[Darkangelv2]

think this will only fit pre facelifts unless you can 3d print a new maf holder for si models

Hi Mr Tourette as you know I’ve been looking for an AFE for a while for my 07 3.0SI e86 would this fit please mate? Or if not is it hard to make fit?

Cheers

It won’t fit - you’d need to somehow create a mount for the MAF in some custom pipe work.

This is why the AFE is more expensive - it has the pipe work included.

 

[bz4kev]

Will this fit a 3.0 se 2003 ?

 

[bedfordboss]

It will fit the m54 engine perfect

 

[Jamturbo]

Just pm'd

 

[idej_z4]

think this will only fit pre facelifts unless you can 3d print a new maf holder for si models

Hi Mr Tourette as you know I’ve been looking for an AFE for a while for my 07 3.0SI e86 would this fit please mate? Or if not is it hard to make fit?

Cheers

It won’t fit - you’d need to somehow create a mount for the MAF in some custom pipe work.

This is why the AFE is more expensive - it has the pipe work included.

Randomly I have that piece of pipework. I'm removing the cone filter this weekend and it comes with the pipe. Let me know if I can help.

 

[thecookie125]

If this hasn’t gone and I can get hold of the N52 maf adapter I will have this off you please

 

[bedfordboss]

sorry it just sold

 

[PODD_ZILLA]

Hi Mr Tourette as you know I’ve been looking for an AFE for a while for my 07 3.0SI e86 would this fit please mate? Or if not is it hard to make fit?

Cheers

It won’t fit - you’d need to somehow create a mount for the MAF in some custom pipe work.

This is why the AFE is more expensive - it has the pipe work included.

Randomly I have that piece of pipework. I'm removing the cone filter this weekend and it comes with the pipe. Let me know if I can help. 20210515_100856.jpg

I need that maf sensor pipe, where did you get that !

 

[idej_z4]

It won’t fit - you’d need to somehow create a mount for the MAF in some custom pipe work.

This is why the AFE is more expensive - it has the pipe work included.

Randomly I have that piece of pipework. I'm removing the cone filter this weekend and it comes with the pipe. Let me know if I can help. 20210515_100856.jpg

I need that maf sensor pipe, where did you get that !

Bought it from someone on the forum, but it is now sold. I think it orginally came from America.

 

[Argyll Andy]

It won’t fit - you’d need to somehow create a mount for the MAF in some custom pipe work.

This is why the AFE is more expensive - it has the pipe work included.

Randomly I have that piece of pipework. I'm removing the cone filter this weekend and it comes with the pipe. Let me know if I can help. 20210515_100856.jpg

I need that maf sensor pipe, where did you get that !

Best I can do for you

 

[PODD_ZILLA]

Randomly I have that piece of pipework. I'm removing the cone filter this weekend and it comes with the pipe. Let me know if I can help. 20210515_100856.jpg

I need that maf sensor pipe, where did you get that !

Best I can do for you

Awesome ! How much would you like for it including postage ? I’m Uk mainland just incase you aren’t