bmw badges

K

kal

Member
i bought a carbon fiber badges for my Z, but i forgot to buy for the fenders i want to know are they the same as the trunk and hood or different ?!
are they stickers or they have pins ?! coz i think the hood and trunk have different size.

when i ask the seller about the fenders he had no idea about it !! but i think they might be the same size as the trunk badge maybe !
 
I believe the trunk and fender badges are the same size, but i also know for a fact that the hood/front is a special 70mm badge that's slightly smaller.

I believe intgr8r custom mounted a standard bmw badge to his front, so perhaps he can give you some additional feedback.
 
Yes front is 70mm & nobody has them.
I used the one thats used for the wheels, (close)
It's a metal backing with peal & stick 3m.

I used this over the OE Roundel.

I do have a 72mm front which is close...
I'm working on a custom install for the 72mm, I'll post it up if successful.

RE: the side badges.. yes same size as the trunk, except it mounts to the lens with double sided tape.
You need to cut the OE badge off with some floss.
 
i saw on ebay a set hood, trunk and wheel caps and they told me they fit but i don't know about the fenders !

so the fender badges comes with a sticker no pins !?
 
guys i wan't to change the badges to CF, but i'm afriad i get different ones !! and the other problem is the fender badges they don't have them and i don't want my car to look mixed up !! can somebody tell me the sizes of the badges on the Z4 ?!!
 
thanx alot :thumbsup: what about about the wheel caps ?!!

can't i put the trunk badge on the side since they have the same size ?!!
 
kal said:
thanx alot :thumbsup: what about about the wheel caps ?!!

can't i put the trunk badge on the side since they have the same size ?!!
Click to expand...
^That will work.
Since the sides use double sided mounting tape, you will have to cut the pins off the back first.

re: Wheel caps - they were available (e-bay) with 3M peel & stick backing. (smaller than 70mm)
 
I didn't actually measure them, but they are slightly smaller than the front 70mm.
I actually used a wheel badge on the front & it doesn't quite cover the whole thing. (close though)
 
You must log in or register to reply here.
Back
Top Bottom