BMW 313 19" Wheels and Tyres

[Dp557]

Genuine BMW 313 19" Wheels and Tyres

More of an E9X wheel I know but I loved them on my E89 Z4

Fronts:
8 X 19"
et37
5 x 120
Michelin Pilot Sport 3 235/35 Z R19 5mm Tread

Rears:
9 X 19"
et39
5 x 120
Falken Azenis FK510 255/30 Z R19 7mm Tread

No cracks, buckles or welds.

Great condition, no curb damage etc but appears lacquer has deteriorated slightly around centre cap hole please see photos. They are ready to use just need centre caps.

Due to size/ weight collection only from Wolverhampton although if local I'm sure could deliver them.

£600 o.n.o

 

[ShaunKC]

I do like this style of wheel and am sorely tempted, I have a couple of questions though that hopefully somebody will be able to supply the answers to...

• Would these fit on a Z4M lowered on Eibach's?

• My current rear tyres Michelin are 265/30 R19 with plenty of tread, so I would want to swop the tyres onto these wheels, would they fit Ok?

Thanks in advance

 

[Dav the wheel nut]

Compared to the standard 224 Z4M wheels these would protrude by 5mm at the front and retract by 9mm on the rears so I see no reason why they wouldn't fit unless someone more informed can say otherwise. :|

 

[mr wilks]

These are cheap for oe 313s even with the centre lacquer blown , you could easily fit 15mm spacers behind the rears Shaun to overcome the 9mm + add 6mm , i ran 224s with 15mm spacers on lowered ZM , no issues & effectively adding the 15mm would give almost identical fitment to gen CSL rears 9.5j et 27

 

[ShaunKC]

These are cheap for oe 313s even with the centre lacquer blown , you could easily fit 15mm spacers behind the rears Shaun to overcome the 9mm + add 6mm , i ran 224s with 15mm spacers on lowered ZM , no issues & effectively adding the 15mm would give almost identical fitment to gen CSL rears 9.5j et 27

Cheers Andy / Dav, decisions, decisions!

 

[Dp557]

Thank you mr Wilks I couldn’t have answered the question that well.

I forgot to add I would part ex up or down for CSL’s genuine or reps.

 

[mr wilks]

Thank you mr Wilks I couldn’t have answered the question that well.

I forgot to add I would part ex up or down for CSL’s genuine or reps.

Hhmmm :wink: i just happen to have a set of those ( rep 19s )

Shaun has first shout

 

[ShaunKC]

Thank you mr Wilks I couldn’t have answered the question that well.

I forgot to add I would part ex up or down for CSL’s genuine or reps.

Hhmmm :wink: i just happen to have a set of those ( rep 19s )

Shaun has first shout

Thank you mr Wilks I couldn’t have answered the question that well.

I forgot to add I would part ex up or down for CSL’s genuine or reps.

Hhmmm :wink: i just happen to have a set of those ( rep 19s )

Shaun has first shout

Thanks Andy, I’m going to pass on these, the distance is a bit far for me to collect, and I think my tyres would be a bit bulging on these rims.

Maybe I’ll buy them off you when you have refurbished them and put them on one of your cars, and got bored of them after a couple of weeks