Bilstein PSS10 from E46M3

K

kennef

Member
 KL
Hi Guys,

I have been offered a set of used PSS10 from a E46 M3 and was wondering if it will fit the Z4M? I have a 2006 model.

Thanks in advance.
 
think the rears will as we share the same rear setup as the M3 CSL. You could remove the rear and compare just to make sure - it's pretty easy..... two bolts up top and one at the bottom..
 
bit difficult as the owner is parting out some mods from his M3 before selling it. Everything is on a swap basis.

Anyone knows what the differences are?
 
flatout said:
think the rears will as we share the same rear setup as the M3 CSL. You could remove the rear and compare just to make sure - it's pretty easy..... two bolts up top and one at the bottom..
Click to expand...

I didnt know that, is it just the general design at the rear or the parts also? Dampers must be different are they?
 
Only the upper rear wishbones are the same between the Z4M and the CSL. They have the same parts numbers but the trailing arm and lower wishbone are different and so are the shocks and springs. Parts would not be interchangeable.
 
Great suspension, i had them on my M3.

However they will not fit which is why i sold mine when i sold the M3.

You also need to considerthat you really should be looking at components that have specifically been designed for the Z4m.

If i go for another set of coilovers i'll go for the Kw's
 
You must log in or register to reply here.
Back
Top Bottom