Bi-Xenon Halo Ring Plug/Cable

W

Wolverine_1999

Member
 Munich
Hi All,

I recently bought a used bi-xenon headlight for the facelift. Problem is, the halo cable is snapped (cut?) so the ring isn't lighting up.

Any idea where on Realoem I can find a replacement, or what type of plug this is? Here are some pictures:

Cable cut in the car:

Cut.jpg


Plug:

Cable.jpg
 
It's part of the internal light wiring. The plug picture is what goes into the connection in the bottom right of the first picture.

Used lights, I was just after the lenses. Fixing them up now to sell them on.
 
So it's a picture of the plug from the other side unit and you don't have a connector? Part number should be on it but they can be hard to source as they don't appear to be available as individual parts (from RealOEM). You'd have to try and find the (tyco?) drawings.
 
Yes correct, the only thing I see written on it is "AMP 23"

The other option would to just wire in the correct wires using electrical connectors, or "plugs", that go over each of the two metal connector strips
 
Just an update - re-cabled with clamps and they working perfectly. Problem is broken bulb indicator on dash (incorrect resistance). At least the ring works, the indicator can be programmed out or correct cabling resistance must be used
 
You must log in or register to reply here.
Back
Top Bottom