Believe i got my airbag coded with a new issue showing up

B

Blacksquid

New member
Managed to stumble my way threw the guide posted in my other post on replacing an airbag module I believe i got it working for the most part however I have a new issue present.

Inpa is producing the error 93AC ive back tracked it to my vin not matching and for whatever reason ncs providing a dummy vin in place. Ive been at this for hours, anyone have any info? TIA
 
Soo here's the issue with that and how I figured out it was a dummy vin. The one that auto populated was "WBAAA00000LS201153" very similar to mine which "WBABT32050LS20115" so my first thought was any digit before "L" and after "5" where just place holders. However tried going through that route and wont work. unfortunately won't allow me to change anything in that direction. Tried manually adding my vin. That also threw an error in ncs. What ive come up to is ive either done something wrong or my module won't accept changes and is locked/bricked. I'm just not knowledgeable on this stuff to know where or if I went wrong with it.
 
Any way you'd be willing to jump on a screen share with me and guide me? I thought for sure I had followed that process correctly. Issue im running into is a lot of my programs have different inputs. So ive had to kinda rely on chatgpt interpretation and old forum posts ive dug up from 10-20 years ago.

For refrence all the tools im using either came with my d+kcan cable or i downloaded off easy mikes bmw tools.
 
bigwinn said:
I’ll send you my step by step guide that may help

Pm me your email
Click to expand...

Hey so I followed that guide correctly I believe. After clearing i have now 4 codes in inpa

93E4
93AC error count 2 (this one was there before with only 1)
93E6

2 are seatbelt codes which I don't get where they came from because I never touched them and the other is still the same issue of non-start of system time. (Going purely off chatgpt translate) Ediabas started the time correctly. What am I doing wrong?
 
93E4 is related to the key switch to disable the passenger airbag
93e6 also relates to the same- but saying the warning light is circuit open

Is the unit you have coded compatible with the defective one? You checked the list against your original unit?
 
bigwinn said:
93E4 is related to the key switch to disable the passenger airbag
93e6 also relates to the same- but saying the warning light is circuit open

Is the unit you have coded compatible with the defective one? You checked the list against your original unit?
Click to expand...
correct the oem part number is identical

Original was 6935920
New is 6935920

Just to clarify i have 2 of the same in my possession 1 is torn apart and isn't the newly bought one.
 
Is it a duff module? I always fit the new one and check the codes in it before I start. Should just have one for wrong VIN. Only once that is coded will it then give you a system time error.
So if you have any other codes than that before you start then it could be a bad module.
Once coded you will find it triggers time out codes on the other modules which can easily be cleared.
If you've done everything exactly as the instructions say then time to consider the viability of that module
 
enuff_zed said:
Is it a duff module? I always fit the new one and check the codes in it before I start. Should just have one for wrong VIN. Only once that is coded will it then give you a system time error.
So if you have any other codes than that before you start then it could be a bad module.
Once coded you will find it triggers time out codes on the other modules which can easily be cleared.
If you've done everything exactly as the instructions say then time to consider the viability of that module
Click to expand...

When I installed it all i had for codes showing up was incorrect vin. It's vary likely a bad module as it was purchased off ebay in Japan, seller was vary keen on explaining that there was no returns. Unfortunately it was definitely a gamble but the only one matching anything related to what would work for my car.
 
Blacksquid said:
So is the consensus the replacement module is faulty as well?
Click to expand...
If the only code you had was incorrect vin then it is likely it is ok. However, it is hard to tell exactly what has happened in the coding process?
 
enuff_zed said:
Blacksquid said:
So is the consensus the replacement module is faulty as well?
Click to expand...
If the only code you had was incorrect vin then it is likely it is ok. However, it is hard to tell exactly what has happened in the coding process?
Click to expand...

Yea I don't know my self, this is way out of my league. I am not the brightest when it comes to coding, and the fact I know zero German is making it that much harder. is there any chance one of you 2 would be willing to guide me through a screenshare on discord or skype or something?
 
So ive tried doing the whole sequence again still cant figure out where im going wrong, I either have the 1 code 93ac or all 3 of the same ones as before.

I'm in a predicament with this car. I live relatively remote in canada and the nearest person to me that thinks he "might be able to fix it" is 6 hours drive away. Everyone else won't even touch it with it being a japanese import. I'm willing to pay or tip or whatever if someone is able to fix this and save me the hassle of trailering this car 6 hour drive 1 way. I just really need a hand with this.
 
You must log in or register to reply here.
Back
Top