Bbk for z4m.

[z4mcc]

I’m looking for a bbk to fit the front of my z4m.

Pbmw brembo or Ap would be too if the list. Open to ksports and Porsche brembo too.

 

[Ed Doe]

https://www.facebook.com/marketplace/item/286778486190707/

I've fitted these in the past, with brackets from Epytec.de, goodridge braided lines, OE Z4M Discs & spacers (5mm minimum needed to clear the 224M spokes).

 

[z4mcc]

They will do nicely

 

[Anonymous]

I believe Craig3.2 that has an E85M has a similar setup fitted?

I fitted a BMW factory kit with all parts for an E89 using those same calipers, works very well, appreciate its not a m!

 

[Attilio]

https://www.facebook.com/marketplace/item/286778486190707/

I've fitted these in the past, with brackets from Epytec.de, goodridge braided lines, OE Z4M Discs & spacers (5mm minimum needed to clear the 224M spokes).

what is it that you fitted? The link is no longer working

thanks in advance!
A

 

[PDJ]

Quary motors in Sheffield are asking around £800 for callipers pads and discs from a 135i and they recon on getting them every 6 to 7 weeks

 

[Ed Doe]

https://www.facebook.com/marketplace/item/286778486190707/

I've fitted these in the past, with brackets from Epytec.de, goodridge braided lines, OE Z4M Discs & spacers (5mm minimum needed to clear the 224M spokes).

what is it that you fitted? The link is no longer working

thanks in advance!
A

Ah it was a set of adapter brackets for the Z4M hubs for the 1st gen M135i 6pot calipers. I'll dig out a pic later of them fitted to my 3.0si - they worked a treat - in fact I'm fairly sure the pad pattern is identical to the ap racing 6pots I have on my MC

 

[Attilio]

Thank you!

 

[whopwop]

https://burkhart-engineering.com/shop/bmw/bmw-ag/bmw-3er/brembo-6-kolben-performance-bremsanlage-vorderachse-bmw-e46-m3-z4-m/

I have fitted these from Burkhart in Germany.
Great set up