Backbox delete done, and 3.5” twin Akrapovic quad conversion installed

Z4_ATB

Member
Backbox delete done, and 3.5” twin Akrapovic quad conversion installed - sounds great on startup and pops and bangs on the overrun in 1st, 2nd and 3rd 😍
 

Attachments

  • C4B9A6A9-3C5B-4259-B06A-89F9ACAA6113.jpeg
    C4B9A6A9-3C5B-4259-B06A-89F9ACAA6113.jpeg
    237.3 KB · Views: 387
  • 2CF9ECC1-47A8-4914-B346-AD4729A3C554.jpeg
    2CF9ECC1-47A8-4914-B346-AD4729A3C554.jpeg
    191.3 KB · Views: 387
  • 27CB3886-D77A-4089-A6A1-569D0B31029A.jpeg
    27CB3886-D77A-4089-A6A1-569D0B31029A.jpeg
    148.9 KB · Views: 387
  • E8AA7759-3DFF-4C89-B3F3-369C528405BF.jpeg
    E8AA7759-3DFF-4C89-B3F3-369C528405BF.jpeg
    141.2 KB · Views: 387
  • EE6DEFC5-17EB-46F1-B8C1-02A7D084FA7A.jpeg
    EE6DEFC5-17EB-46F1-B8C1-02A7D084FA7A.jpeg
    211.6 KB · Views: 387
Love the tips, decent job mate, definitely get a vid up ;)
Are the tips a tight squeeze to get in the recess say on a e86 rear bumper cut out?
 
HU51A_FU said:
Love the tips, decent job mate, definitely get a vid up ;)
Are the tips a tight squeeze to get in the recess say on a e86 rear bumper cut out?

They need some final adjustment to match each other perfectly but they -do- fit in the original cut out just! It helps having the outer shield/cover too as the stainless gets very hot but the outer carbon remains cold so the bumper won’t melt πŸ‘πŸ»

I’ll get a vid up ASAP! Just had these arrive so will get these fitted soon
 

Attachments

  • 342C632E-12C8-4C37-99FF-BE9F52C7C308.jpeg
    342C632E-12C8-4C37-99FF-BE9F52C7C308.jpeg
    132.1 KB · Views: 205
Back
Top Bottom