AP-Racing 6 Piston Kit CP5575-1004 Calipers, Pads & Discs

X

X-S-Z

Member
 Baku, Azerbaijan
AP Racing CP5575-1004

http://www.apracing.com/product_det..._6_piston_kit_cp5575-1004-17mm_thick_pad.aspx

The calipers have around 12,000 miles on them, not heavy use. In perfect working order when removed from car (BMW Z4M) before sale last month. The discs are just use-able, they have been an advisory on previous MoT but not a fail point. The pads are new Pagid PS29 with around 2,000 miles on them.

The set is around £2,665 new, brake pads are around £250 for the set.

https://www.vagbremtechnic.com/ap-r...-6-piston-caliper-356x32mm-discs-cp5575-1004/

Looking for £1,250 o.n.o. with buyer collecting or arranging postage.
 
Good luck with the sale, these shouldn’t be around for long :thumbsup:

Just clarifying, as I’m sorted myself :P

As this is an e43 M3 specific kit, can you confirm these fit a standard Z4M front wheel, without any mods/spacers/etc., as I’ve seen some warnings on M3-Cutters/Z-Post about small differences between the 2 kits (different disc & bracket part numbers).

For reference, the Z4M kit is CP5575-1010.
 
Any pictures?

Where are you located?

also can you confirm this is defiantly the E46 M3 kit or is it a Z4M kit?
 
mmm-five said:
As this is an e43 M3 specific kit, can you confirm these fit a standard Z4M front wheel, without any mods/spacers/etc., as I’ve seen some warnings on M3-Cutters/Z-Post about small differences between the 2 kits (different disc & bracket part numbers).

For reference, the Z4M kit is CP5575-1010.
Click to expand...

Correct they are M3 ones, not Z4 ones.
 
hopz121 said:
Any pictures?

Where are you located?

also can you confirm this is defiantly the E46 M3 kit or is it a Z4M kit?
Click to expand...

Pictures to follow... (I am out of country but my friend has them and will send me shortly then I'll post)

The brakes are located in Falkirk just now (I am not).

Yes, 100% E46 M3 kit.
 
I’m running an E46 M3 AP Racing BBK front and rear on my Z4MC. The fronts need a 2mm washer under each of the caliper mounting bolts, the rears fit without shims.
I bought my BBK from Fishy Dave. He sought and was given approval by an engineer at AP for the use of washers as shims for this purpose when he purchased the BBK.
No wheel spacers are required with 18 or 19 inch wheels.
GLWTS :thumbsup:
 
BMWZ4MC said:
I’m running an E46 M3 AP Racing BBK front and rear on my Z4MC. The fronts need a 2mm washer under each of the mounting bolts, the rears fit without shims.
I bought my BBK from Fishy Dave. He sought and was given approval by an engineer at AP for the use of washers as shims for this purpose when he purchased the BBK.
GLWTS :thumbsup:
Click to expand...

Thanks! In this case I must also have the washers lying with the box of bits... when the photos arrive it'll confirm. So they're supplied ready to fit :D
 
My front calipers came with eight identical washers, four sit under the heads of the four caliper bolts whilst the other four washers are the shims.
 
Bear in mind that the M3 disc bells are slightly different too. I had a local company make me a 2mm shim to fit between the bell and the hub, otherwise the disc is too close to the bottom ball joint. This solution worked just fine up to the point I bought Z4M specific bells from Reyland. :)
 
Fishy Dave said:
Bear in mind that the M3 disc bells are slightly different too. I had a local company make me a 2mm shim to fit between the bell and the hub, otherwise the disc is too close to the bottom ball joint. This solution worked just fine up to the point I bought Z4M specific bells from Reyland. :)
Click to expand...

Ah yes that reminds me, there was a 2mm spacer under the hub... easy enough to get machined up.
 
This was the reason for my query...

Going into a purchase fully informed is fine, but you really don’t want to buy a kit, arrange to get it fitted, and then find out it won’t fit because you need something machined!
 
Great price!

Interesting about fitment too, Dave how much were the bells alone?

I just bought an e46 m3 for it's full set of Ap's, and a few other goodies :driving:
 
bradz said:
Great price!

Interesting about fitment too, Dave how much were the bells alone?

I just bought an e46 m3 for it's full set of Ap's, and a few other goodies :driving:
Click to expand...

Unfortunately about £240 I think.
 
TomK said:
bradz said:
Great price!

Interesting about fitment too, Dave how much were the bells alone?

I just bought an e46 m3 for it's full set of Ap's, and a few other goodies :driving:
Click to expand...

Unfortunately about £240 I think.
Click to expand...

I can't remember the exact price but that does sound about right, they were cheaper than going direct to AP.
 
Apologies for the delay, I've been waiting for my friend to send me the pics... they need a good clean-up which he's refusing to-do so this is how they come... fully functional which is the real requirement here!

https://imgur.com/a/dFGGc6k
 
Yea look like they need a bit too much love for me at that price.

If you struggle to sell let me know and I’ll send you an offer.
 
hopz121 said:
Yea look like they need a bit too much love for me at that price.

If you struggle to sell let me know and I’ll send you an offer.
Click to expand...

I am open to offer... PM me :)
 
There are lots of heatcracks in the disc. Not very safe imho. Those should be changed asap.
 
You must log in or register to reply here.
Back
Top Bottom