Anyone running 19x9j front wheels?

[Fishy Dave]

That was how I came to try fitting the rears on the front, I'd read it couldn't be done but thought I would give it a try...just in case!

 

[99ron]

30 offset for the 224 rear isn't it? Maybe that's the extra too far. I have no issues with mine 9J @et35.

 

[99ron]

Mr Wilks - haven't you tried 9J ET37 on the fronts? Just 2mm difference. oke:
You were recommending them here....http://www.z4-forum.com/forum/viewtopic.php?t=64685

 

[mr wilks]

Mr Wilks - haven't you tried 9J ET37 on the fronts? Just 2mm difference. oke:
You were recommending them here....http://www.z4-forum.com/forum/viewtopic.php?t=64685

I've not said the wheels the OP wants won't fit have i :? simply that trying a wheel will sometimes give you a better impression than a calculation online will then you can decide & either put a line through the idea or not
9J et 37 will clearly fit either M or non M z4 dependent on suspension so not sure why youve spent time trawling back through 3 years of my posts clearly time to burn so crack on chap oke:

 

[99ron]

Hahaha.. was a 2 second search. Search for wheels and ET and you are usually the man with the knowledge
Just trying to help the Op out with examples.

 

[mr wilks]

Hahaha.. was a 2 second search. Search for wheels and ET and you are usually the man with the knowledge
Just trying to help the Op out with examples.

well Ive no doubt a search would uncover much bollox as no doubt would a search of most other forum posters

 

[RedUn]

I run CSLs with a 12mm spacer so essentially an et32 on a 8.5j if that's any help.

 

[bmwaddict]

Thanks RedUn. I'm currently running 8.5j et30 fronts lowered on H&Rs with no rubbing but it's on the limit!

 

[RedUn]

No problem

If you go lower it'll rub, my arch liner is worn on 2.5 degs camber too