Anyone fitted this?

https://goo.gl/CZDjCq

I think it would sharpen up the front end on my coupe - anyone fitted one or have something similar to recommend? I'm hoping it's an easy job?
 
Yea been done before , think Joycey below has it & possibly NeilP + Si-forks among others


file.php
 
I was sure there would be many on here with it... Unfortuntely it is hard to see clearly on the blue coupe above but I recognise that car from another thread and it looks great!

I'm tempted to pull the trigger provided it is "easy" to fit... Ideally I would love to hear from someone who has fitted one!
 
flight174z said:
I was sure there would be many on here with it... Unfortuntely it is hard to see clearly on the blue coupe above but I recognise that car from another thread and it looks great!

I'm tempted to pull the trigger provided it is "easy" to fit... Ideally I would love to hear from someone who has fitted one!

At that buy it now price its worth a punt :thumbsup:
 
I'm not sure if it is still the case but these were available for £25 I think from the main dealer when I had my seat .... May not be the case anymore but worth a look
 
I have the LCR splitter fitted to my coupe.

It's fairly straight forward to fit with minor modifications required to the original fixings which I needed to cut off. Then I kept it in place with a few screws.

It's been fitted for 3 years now and it's been caught on a few multi-storey car park ramps and it's still intact.

I bought mine direct from the dealer which was around £30 back in 2013.
 
I am tempted and know from my M3 CSL one and Lotus Exige that they can become a bit sacrificial and almost a service item!

I traced around Exige one and fitted thin plywood template underneath and bonded it. Lasted really well.

French village speed bumps are anti tank in some places so beware splitters.

I like the look of this one:
http://www.ebay.co.uk/itm/222311550964?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

anyone tried it?

Merry Christmas the lot of you
 
Back
Top Bottom