Evening everybody, so been on the motorway today and noticed when on a long curve it seemed to stick. So when i got home I've read through how to turn the adjustment on the motor so I lossened the two torque bolts with a 8mm ratchet spanner worked great,
But looking towards front of car I have adjusted it towards the front of the car which has seemed to work but I have only moved it about 10mm and won't go any further. So I tried the other way which it traveled a fair way to another stop I would say at least 70 80mm but that tightened it up to the point I could hardly move the steering wheel so my 1st direction was correct. So put it back but again went for a decent run on the M1 still the same I also noticed near the adjustment and motor there was some oily deposits has anybody any idea on my next course of action please
But looking towards front of car I have adjusted it towards the front of the car which has seemed to work but I have only moved it about 10mm and won't go any further. So I tried the other way which it traveled a fair way to another stop I would say at least 70 80mm but that tightened it up to the point I could hardly move the steering wheel so my 1st direction was correct. So put it back but again went for a decent run on the M1 still the same I also noticed near the adjustment and motor there was some oily deposits has anybody any idea on my next course of action please