SpiketheBike
Member
Finally replaced the H8 bulbs with Cree 80W LEDs.
Due to the alignment of the spigots on the LED housing, I had to remove the fans, after checking with the supplier this was okay. Still a very tight fit though. Lots of knuckle skinning involved. :wink:
Difficult to take pictures in day time as the refresh rate of the LED seems to be the same as my phone camera, so they appear off in half the pictures!
Anyhoo, here's the results. I'm very pleased with them.
Due to the alignment of the spigots on the LED housing, I had to remove the fans, after checking with the supplier this was okay. Still a very tight fit though. Lots of knuckle skinning involved. :wink:
Difficult to take pictures in day time as the refresh rate of the LED seems to be the same as my phone camera, so they appear off in half the pictures!
Anyhoo, here's the results. I'm very pleased with them.