Amazon headlight restoration kit

Just be careful with a rotary pad on a drill either from skidding across the lens, or applying too much pressure/too long in one spot and melting the lens.

Did mine with Meguiars - bottle of each of polish and cleaner and the Porter cable. Took about 15 mins
 
cj10jeeper said:
Just be careful with a rotary pad on a drill either from skidding across the lens, or applying too much pressure/too long in one spot and melting the lens.

Did mine with Meguiars - bottle of each of polish and cleaner and the Porter cable. Took about 15 mins
Click to expand...
What were the results like cj?
 
andysat said:
cj10jeeper said:
Just be careful with a rotary pad on a drill either from skidding across the lens, or applying too much pressure/too long in one spot and melting the lens.

Did mine with Meguiars - bottle of each of polish and cleaner and the Porter cable. Took about 15 mins
Click to expand...
What were the results like cj?
Click to expand...

Those who know my Zed know they would be perfect or never been accepted :)
 
Well the paper that comes in this kit is too fine to remove the crazed coating, at least by hand :thumbsdown:

Going to pick up some coarser paper and finish the job, but in hindsight the 3M kit would probably have done a better job with it all being done with the drill.
 
tomotomotomo said:
Well the paper that comes in this kit is too fine to remove the crazed coating, at least by hand :thumbsdown:

Going to pick up some coarser paper and finish the job, but in hindsight the 3M kit would probably have done a better job with it all being done with the drill.
Click to expand...

Check my thread for tips if you need them :) You can buy any of the products I used to complement your kit if necessary
http://www.z4-forum.com/forum/viewtopic.php?f=15&t=57926
 
You must log in or register to reply here.
Back
Top Bottom