Few days ago I noticed that the aircon in my shed4 is not working, it’s not blowing cold air at all. I had it serviced last year as a preventative thing as I had no information when it has been done previously.
When I turn the AC on, the light on the dash stays on as if it was working, same with the MAX button. Unfortunately the compressor does not kick in, checked visually that the middle part of the pulley is not spinning when AC is engaged.
What I have checked until now:
- No error codes
- Transport mode is not on
- I have checked in INPA that the radiator fan is working in all of the speeds
- I have engaged the AC clutch in INPA, does not engage.
- There is pressure in the system (~6 bar in INPA)
What should I check next? I have yet to check the fuses/clutch relay. Of I understood correctly, the’re located behind the glovebox?
I went through many of the topics with a similar issue but could not find a solution to my problem in them.
When I turn the AC on, the light on the dash stays on as if it was working, same with the MAX button. Unfortunately the compressor does not kick in, checked visually that the middle part of the pulley is not spinning when AC is engaged.
What I have checked until now:
- No error codes
- Transport mode is not on
- I have checked in INPA that the radiator fan is working in all of the speeds
- I have engaged the AC clutch in INPA, does not engage.
- There is pressure in the system (~6 bar in INPA)
What should I check next? I have yet to check the fuses/clutch relay. Of I understood correctly, the’re located behind the glovebox?
I went through many of the topics with a similar issue but could not find a solution to my problem in them.