Airbags

davewuyts said:
I'm going to need to replace my module - light still stays on and the same 1 fault shows up. This is the detail from Real OEM. Can anyone supply me with just the 65776933985 module?

Sensor, B-pillar left
From:
05/15/2003
To:
05/17/2004 (ENDED
Weight:
187.300 kg

Part 65776933985 was found on the following vehicles:
Z4 E85 (04/2002 — 11/2005)

Superseded by:
65776948087
(03/18/2004 —), Exchangeable retrospectively

Supersedes:
65776928571
(11/25/2002 — 07/11/2003), Exchangeable retrospectively
65776928520
(09/02/2002 — 07/01/2002), Exchangeable retrospectively
65776926784
(09/02/2002 — 05/22/2002), Exchangeable retrospectively
65776926782
(09/02/2002 — 04/23/2002), Exchangeable retrospectively
65776924604
(09/02/2002 — 03/18/2002)

Replied
 
Had another session on Daves airbag problems today, he had fitted another used compatable main airbag module so an initial Health Report scan was made first using the Launch Tablet. This revealed a few issues with the module codes suggested that the passenger airbag had been fired which would mean module is locked up. No chance of coding this module to Daves car so it gets the correct Vin number. Tried this a number of times but it came back with communication error. The right satellite module was also comming up with no communication, the left satellite module could be seen but wouldn't code to change the Vin number in that.
Every module Dave has aquired so far have proved duff and won't code to his car.
A new code pertaining to the left seat belt tensioner low resistance also made an appearance for the first time in this sorry saga, thats on thre back burner as the main and right satellite modules are the main bone of contention and need to be fixed.
Finding a servicable module is very difficult all Dave manages to get hold off are proving duff and uncodable.
Seems we need a complete set of modules from a car that has no codes set in order to start afresh. If a set can be found we would expect each module to set Wrong Vin codes when fitted to Daves car, then we may be able to change the Vin in each of them.
This is the most frustrating set of fauilts I have ever encountered, just hate not sorting it.
 
I know it means a wait but end of this month I’m going to break my old 4-pot.
It has no airbag codes and if all three have compatible numbers then I’m happy to send them all together.
Sorry I can’t do it sooner but I’ll put Dave’s name on the list for now.
Hopefully you’ll find something sooner but if not let me know.
MOT expires 27th so available straight after that
 
[ref]colb[/ref], would it be worth trying to get the fibre optic cable or whatever it is that links the modules out of my car and putting that together with the modules as well?
 
Not at all sure about the fibre optic cable and its actual function I have always thought they communicate through the wires and am presuming if the main module is faulty that the cause of non communication errors with the satellite modules although Daves is showing an error with his rightsatellite module and the passenger seat belt pre tensioner which I believe are addittional faults to the main module issue.
 
Latest Launch report on 14/06/2023 with latest replacement module fitted
 

Attachments

  • Screenshot 2023-06-15 at 12-20-01 Inspection Report Daves.png
    Screenshot 2023-06-15 at 12-20-01 Inspection Report Daves.png
    51.1 KB · Views: 456
The thing is, several of these faults did not show up when previous modules I bought were loaded. I think there is confusion in the communication. Is it easy to replace the coaxial cable and can that make a difference?

I mean fibre-optic cable! If it's easy to remove it's worth it i think.
 
Found this explanantion of the function of fibre optic cables
https://www.cartechnology.co.uk/showthread.php?tid=31057
Not conviced there is anything wrong with Daves Fibre optics its seem to me we get different codes comming up as a result of the condition of the respective modules we have tried in the car, each one has various codes that were obviously set in the doner car.
 
colb said:
Found this explanantion of the function of fibre optic cables
https://www.cartechnology.co.uk/showthread.php?tid=31057
Not conviced there is anything wrong with Daves Fibre optics its seem to me we get different codes comming up as a result of the condition of the respective modules we have tried in the car, each one has various codes that were obviously set in the doner car.
Ok well hopefully you’ll be sorted before then but if not, and assuming they are compatible, I will do a full code check of all three and send them together. But will be a couple more weeks I’m afraid
 
Hiya! I won't need the airbag modules now as I've sold the car! Difficult decision but the right one I think. Thanks for your help anyway!
 
davewuyts said:
Hiya! I won't need the airbag modules now as I've sold the car! Difficult decision but the right one I think. Thanks for your help anyway!

Hopefully with full disclosure? :wink:
 
Ha ha. Not a full blow by blow account but told them which module needed to be found for repair to happen.
 
Hi bigwinn
New to the forum reading posts about water ingress onto the SBSL b pillae ECU, of which mine has died due to it.
I see from a post you have 2 sets for sale?
The part number of my SBSL unit is 6953009, but it has been superceded by these other 2 6962887 or 6974366
My car is a 2005 z4 2.2.
If you still have them, and they are compatible would you want to sell one? Thanks.
Im in Aberdare South Wales, not too far from another member who has replied in this thread . I`d need to get in flashed then to insert my vin number onto the replacement unit.
Many thanks
Anthony.
 
anthonyevs said:
Hi bigwinn
New to the forum reading posts about water ingress onto the SBSL b pillae ECU, of which mine has died due to it.
I see from a post you have 2 sets for sale?
The part number of my SBSL unit is 6953009, but it has been superceded by these other 2 6962887 or 6974366
My car is a 2005 z4 2.2.
If you still have them, and they are compatible would you want to sell one? Thanks.
Im in Aberdare South Wales, not too far from another member who has replied in this thread . I`d need to get in flashed then to insert my vin number onto the replacement unit.
Many thanks
Anthony.
Welcome to the forum Anthony.
You will need three posts and then you can PM bigwinn.
In the meantime I will notify him by referring to him thus...............[ref]bigwinn[/ref]. :D
 
I see quite a few posts about the SBSL issues,and i have already found some great info and links to another site for a search for compatible part numbers, at realoem.com, i found that very sefull as it has shown another 2 ecu parts that can and shound be ok to work with my car, so it broadens my search for a part. These are hard to get hold of at the minute tho, only 1 i can see and thats from the USA.
Thanks
Anthony.
 
I see quite a few posts about the SBSL issues,and i have already found some great info and links to another site for a search for compatible part numbers, at realoem.com, i found that very sefull as it has shown another 2 ecu parts that can and shound be ok to work with my car, so it broadens my search for a part. These are hard to get hold of at the minute tho, only 1 i can see and thats from the USA.
Thanks
Anthony.
 
anthonyevs said:
I see quite a few posts about the SBSL issues,and i have already found some great info and links to another site for a search for compatible part numbers, at realoem.com, i found that very sefull as it has shown another 2 ecu parts that can and shound be ok to work with my car, so it broadens my search for a part. These are hard to get hold of at the minute tho, only 1 i can see and thats from the USA.
Thanks
Anthony.

Evening

I’m not 100% sure what I’ve got in the parts bin at the moment

Can you drop me a line next week once I’ve had chance to check

Thx
 
Back
Top Bottom