Airbag control modules- help needed
- Thread starter bigwinn
- Start date
See this list from Realoem. You can replace with any that say Exchangeable retrospectively or Bilaterally exchangeable. Or of course, find one the same.
Whichever you do will need coding of the VIN and system time once fitted.
However, now you mention the seat swap you may want to look further at that first.
Whichever you do will need coding of the VIN and system time once fitted.
However, now you mention the seat swap you may want to look further at that first.
Hello hello it’s me again and my airbag light 
too … actually I found the problem it was occupancy sensor issue yea that one where we sit on… it was broken … so let’s begin. 1. I replaced the occupancy sensor . 2. I check all the cables contact ions too .3 I try be smart and put bypass plug actually I try twice… so now all cables are in oem position occupancy sensor is new 
but i still have problem with airbag light.. my obd shows short circuit or communication fault.please give me any advice 
because I don’t know where is the issue 
too … actually I found the problem it was occupancy sensor issue yea that one where we sit on… it was broken … so let’s begin. 1. I replaced the occupancy sensor . 2. I check all the cables contact ions too .3 I try be smart and put bypass plug actually I try twice… so now all cables are in oem position occupancy sensor is new but i still have problem with airbag light.. my obd shows short circuit or communication fault.please give me any advice because I don’t know where is the issue 
Rokas, I was not referring to your posts. I was referring to the level of technical language used by the guys offering help and advice being way above my head. It was meant to be light hearted. Please accept my apologies if I have offended you I certainly didn’t mean to do so.Rokas2017 said:So if u cannot talk properly another languages do not judge me because I can talk more then two languages and in the future my English will be better and better. Advice to you for future thinkbefore saying something. Thank you.
Usel
Senior member
This little box could be faulty:
I have had a faulty seat occupancy bypass from new, you may have been unlucky and received 2 faulty ones.
If both of these parts can be proved to be working correctly, by testing parts in another person's Z4, and you still get an airbag light that cannot be removed permanently then I can only guess you may have a faulty satellite b pillar module of which I have no experience of.
I have had a faulty seat occupancy bypass from new, you may have been unlucky and received 2 faulty ones.
If both of these parts can be proved to be working correctly, by testing parts in another person's Z4, and you still get an airbag light that cannot be removed permanently then I can only guess you may have a faulty satellite b pillar module of which I have no experience of.
[ref]Rokas2017[/ref], I just went back through the previous pages of this thread. I'd forgotten we'd already discussed the SBSL module.
I'm thinking you need to source a compatible one from the list I sent you, then get it coded in.
To code it you'll need this handy guide from mac27040, and of course the software.
https://docs.google.com/document/d/1LdQXN4JM8V0-s6Xa_E9ZeMlkED_i9vpm/edit
I'm thinking you need to source a compatible one from the list I sent you, then get it coded in.
To code it you'll need this handy guide from mac27040, and of course the software.
https://docs.google.com/document/d/1LdQXN4JM8V0-s6Xa_E9ZeMlkED_i9vpm/edit
Hello , yea bro u was right- thank you
so yea seat occupancy sensor from bmw e92 looks the same but not fits …. So what I did I order a bit more expensive bypass socket and that’s it airbag light gone 
I have had a faulty seat occupancy bypass from new, you may have been unlucky and received 2 faulty ones.
If both of these parts can be proved to be working correctly, by testing parts in another person's Z4, and you still get an airbag light that cannot be removed permanently then I can only guess you may have a faulty satellite b pillar module of which I have no experience of.
[/quote]
so yea seat occupancy sensor from bmw e92 looks the same but not fits …. So what I did I order a bit more expensive bypass socket and that’s it airbag light gone I have had a faulty seat occupancy bypass from new, you may have been unlucky and received 2 faulty ones.
If both of these parts can be proved to be working correctly, by testing parts in another person's Z4, and you still get an airbag light that cannot be removed permanently then I can only guess you may have a faulty satellite b pillar module of which I have no experience of.
[/quote]
Similar threads
