Advice with Wheel off sets etc

I currently have the 108 split rims and I think one has a crack/buckle so looking for a cheaper set that can be used as a winter set while I refurb the 3 good ones and look for a fourth.

I can plenty with the staggered fitment of 8j front and 8.5 rear but I believe my current offset is 47 front and 50 rear will there be issues if say these dropped to 40 or similar?
Thanks
 
dbaz193672 said:
I currently have the 108 split rims and I think one has a crack/buckle so looking for a cheaper set that can be used as a winter set while I refurb the 3 good ones and look for a fourth.

I can plenty with the staggered fitment of 8j front and 8.5 rear but I believe my current offset is 47 front and 50 rear will there be issues if say these dropped to 40 or similar?
Thanks

I think this will be OK, you can check yourself using this ....http://www.1010tires.com/tools/wheel-offset-calculator

:)
 
Should be fine - would effectively be like putting 7mm spacers on the front and 10mm on the back, assuming the new wheel sizes are the same as your 108s.
 
Ok great thanks so in laymans terms the lower the off set the wider they will sit out of the body work they are all 18's so that will be ok.
 
Back
Top Bottom