adjusting rear camber

[SlammedZ4]

How do i adjust the camber on the rear as i wanna reduce the camber, its lowered with the adjusters out and have a serious amount of negative camber, do i have to retrofit adjustable rear arms or is there a easier way?

 

[ba3bas]

Nope just take it to a decent alignment centre and they can do it.
You can adjust camber from stock but not something i'd do at home.

No much camber and you will have to much oversteer and we have enough of that.

I take my cars to Wheels in motion in Chesham and have done for the last 4 years.

Yes they have a hunter machine but the guys use stock settings then adjust to suit what you want, or what your car needs if you have uprated suspension, bigger wheels etc etc.

They also have motorsport experience so if you want to run on track they can help

 

[SlammedZ4]

cheers pal, how does it adjust? i know of a good place near me called elites. even with my car lowered alot i could still adjust it so it sits near standard settings? meaning no spending money on adjustable rear arms? sounds perfect lol thanks for the advice pal

 

[Sim_Simma]

cheers pal, how does it adjust? i know of a good place near me called elites. even with my car lowered alot i could still adjust it so it sits near standard settings? meaning no spending money on adjustable rear arms? sounds perfect lol thanks for the advice pal

No arms needed as they are adjustable standard! Jacke the rear up and you'll see the arm bolted to the bottom of the hub, slacken the NUT slightly and you'll see the bolt has an off centre washer that is part of the bolt. So when you turn the bolt it adjusts the camber. If you do want to try it yourself mark it so you know where you started.

 

[SlammedZ4]

cheers pal may have a look 2moro once ive fitted the new window regulator

 

[Sim_Simma]

cheers pal may have a look 2moro once ive fitted the new window regulator

It is easy to do you just need to put some thought in to how much you adjust it and make sure the other side is adjusted the same amount.

 

[ba3bas]

if you are going to do it yourself, make sure you're on a flat surface.
If you have the intention of getting alignment anyway just wait.

 

[SlammedZ4]

managed to get it booked in through a pal at porsche using the latest lazer allignment tools