Adjust Door Striker

B

Bbr92

Member
Hi, I need to adjust my drivers side door striker very slightly as the door isn't sitting flush with the body maybe only a few mm but enough to get an annoying noise when on the motorway. Has anyone done this before and if so any tips on what I need to do?
Thanks
 
Yeah I adjusted mine recently to try and make the door shut more positively with a clonk. Beware though only adjust small amounts at a time. I moved it a fair bit and struggled to open the door!
 
Thanks did you loosen the torx screws and physically move the striker? Mine is out such a small amount the movement of the striker will be tiny?
 
Yes. I put a piece of masking tape on the edge before I loosened the torx screws so that I could tell how much I'd moved it. Don't loosen them too much when you do it.
 
You must log in or register to reply here.
Back
Top Bottom