ABS Warning light / battery change

bbz4m

New member
Hi

Hopefully this has come up before, Just changed battery in 2007 Z4M, replaced OEM with equal spec Bosch AGM
battery £££, expected to reset clock and possibly the windows.

All seemed to go without a hitch, started first time, yes had to set clock :| however within minutes the
brake, abs, stability control warning lights all came on and stayed on :cry:

Has anyone experienced this before, is there any easy fix or a visit to stealers !

Would appreciate any advice
 
What model number is the battery? Is it the right one.

If it is I would disconnect it again for 10-15 minutes and try again.

I had this issue, but when my battery was failing.
 
Reset the ESP?? I've never taken the battery off on my car but on a lot of cars you have to reset the esp after battery disconnected, turn the steering lock to lock to whilst stationary.
 
G-A-R-Y said:
Reset the ESP?? I've never taken the battery off on my car but on a lot of cars you have to reset the esp after battery disconnected, turn the steering lock to lock to whilst stationary.

Do you mean EPS?

If so not on the ///M. But never had to do that on either of my zeds.
 
srhutch said:
What model number is the battery? Is it the right one.

If it is I would disconnect it again for 10-15 minutes and try again.

I had this issue, but when my battery was failing.

The battery is definitely same spec didn't want to get coded/registered it has same AHs, CCA etc etc will try disconnecting and reconnecting thanks
 
bbz4m said:
srhutch said:
What model number is the battery? Is it the right one.

If it is I would disconnect it again for 10-15 minutes and try again.

I had this issue, but when my battery was failing.

The battery is definitely same spec didn't want to get coded/registered it has same AHs, CCA etc etc will try disconnecting and reconnecting thanks

No need for coding on E85/6

Have you also tried cycling the ignition 3 or more times. This can reset some issues like this.
 
Back
Top Bottom