51487047808 Heat resistant plate

S

SGRG

Member
Hi Everyone,

Need your help again. I had custom exhaust installed May of last year and off the back of that it looks like my heat resistant plate didn’t get put back on. Now this could be for fitment issue after custom exhaust was installed which I am trying to clarify with the shop. In the mean time I am bit confused about the part. So according to realoem this is the part:
https://www.realoem.com/bmw/enUS/showparts?id=DU92-EUR-02_2006_E86_BMW_Z4_M32&diagId=51_4956#51487047808

So the confusion for me is that the right upper side triangular shaped seems to be different from what I had on my car:

What I had on my car:
IMG_2376.jpeg

Part available based on reference number from realoem:
IMG_2375.jpeg

What it looks like right now:
IMG_2377.jpeg

Not sure if I am missing something here?

Thanks in advance.
 
its an air duct to push air through the vanes on the diff.... id be unhappy with that being removed to put it politely. will it cause an issue? probably not but it their for air management to help keep a hardworking part cool. if you look at the first pic you can make out the two ducts are it kicks up to the diff cover vanes.
 
Side note who made your exhaust and what did it cost if you don't mind me asking? Looks smart!
 
Beedub said:
its an air duct to push air through the vanes on the diff.... id be unhappy with that being removed to put it politely. will it cause an issue? probably not but it their for air management to help keep a hardworking part cool. if you look at the first pic you can make out the two ducts are it kicks up to the diff cover vanes.
Click to expand...

Yeah not to pleased with it. I have contacted them albeit it’s been year and a bit since the work. Let’s see what they say, they are a good shop so hopefully they will get it sorted.
 
maupineda said:
You picked the wrong item, is number 16 (51487896023) in that diagram. the one you chose is for the non-M
Click to expand...

I entered my vin and got to that so it’s definitely a m part. Even part 16 doesn’t seem like is the full part. Maybe a combination of 16 and 6?
 
Ed Doe said:
Side note who made your exhaust and what did it cost if you don't mind me asking? Looks smart!
Click to expand...

Company called Overkill Performance. They are very good at what they do: https://www.instagram.com/overkillperformanceuk?igshid=OGQ5ZDc2ODk2ZA==

Here is the sound with 8"x 5" oval box 12" long:
https://www.instagram.com/reel/CdgtVV9KmOX/?igshid=MjJkMmIyYzQxYw==

I did have the box switched out to 10" x 5" oval box 14" long due to horrible drone at 2K RPM. Now it’s so much better. So this is a valved system going from nice note to full screaming note.
 
Hello buddy, I have one in good condition from my parted out z4m for a couple of years back. Let me know if you struggle getting your hands on one :thumbsup:
 
Wassup said:
Hello buddy, I have one in good condition from my parted out z4m for a couple of years back. Let me know if you struggle getting your hands on one :thumbsup:
Click to expand...

Hey mate,

Just heard back from them saying it was left out for a reason. I am out of the country until new year so I can’t be sure if they returned this part to me. I have x pipe and two boxes but can’t recall getting the heat shield back.

How much are you looking for? Could you send me a picture and part number?

Thanks
 
You must log in or register to reply here.
Back
Top Bottom