437M Wheels
- Thread starter VRSteve
- Start date
Not without a lot stretch which I imagine isn't your thing...
Ive got 11j rears with an et of 35 which protrudes roughly 12 mm more than those rears and I'm on a 245/35 tyre. Make your own mind up if they 'fit' or not.
With an M axle you'll probably get away with a 255 rear which is still quite a stretch tbh.
Ive got 11j rears with an et of 35 which protrudes roughly 12 mm more than those rears and I'm on a 245/35 tyre. Make your own mind up if they 'fit' or not.
With an M axle you'll probably get away with a 255 rear which is still quite a stretch tbh.
VRSteve said:
Rears will actually sit as 224s on face but rear hubs will be 22mm towards the strut so to get things right you could add 15mm spacers to rear ( i ran same spacers with 224s on my own ZMR) though at that point you wouldn't really want to go any further for fear of leaving the arch .
Fronts ? imagine your 224s with 25mm spacers & that's where the faces of the 437s will finish :? if you can stand that look then yes they will technically fit but can't see the fronts looking too pretty
id say 10mm too much but some may disagree
