30mm back 20 mm front spacers....Any one use them?

K

Kap'nZ4

Member
 USA Kansas City
Over the last 2.5 years and a lot of work to get my car happy, I am now looking at stance over lowing.

So I guess the question is how much is too much and if I can get away with my prescribed spacers from those that know.

I'm looking to go aggressive but not over whelmed.
I have already had my front wells rolled, in preparation, just want some words of wisdom if these spacers might be unwise/aggressive..
 
I have 12mm spacers on the fronts with 225 18" 108 stock wheels. wouldn't risk any more as the tyres are 'a rizla paper' away from touching the wheel arch liners on full lock.
Have 16mm spacers on the back 255 18" 108 stock wheels which are not too aggressive (could go wider but didn't want to risk scrubbing the wheel arches).
I just wanted my wheels to fill in the arches fully.
I would say your rears will be fine, and your fronts too, as long as you don't do too many 3 point turns on full lock!
 
30mm spacers on the rear rubbed ever so slightly on high compression but looked spot on :thumbsup: IMAG2554.jpg
 
I went 15mm front and 20mm rears with standard wheels, absolutely no issues. As said before it will depend on width, ET........
 
You must log in or register to reply here.
Back
Top Bottom