2010 e89 z4 2.3i ecu plug and wire colours

G

Gazz

Member
Hi to all, I am a newbie on here,I have just bought a damaged z4 m sport 2010 e89 2.3i and I am a little stuck with an electrical wiring problem. Well not so little really, somebody decided to cut all the wires inside the e box and removed the ecu, I have managed to replace the ecu and cas3 module and key, and the engine bay wiring harness but I am stuck on connecting the last 18 wires that come from the main chassis harrness and plugs into the ecu, does anybody have a close up pic or could take one of the colour of all the wires and where they go into the plug that plugs into the ecu these are the wires that come from the bottom of the e box and not the wires that come from the engine bay harness. I need a picture of both sides of the plug showing which colour wire goes where .regards Gaz.
 
20190601_072251.jpg here are a couple of pics of the type of of plug and size of wires this is the engine bay harness plug I need the some pics of the other one that sits next to this one into the smaller two plugs that plug into the top of the ecu.if anybody on here could take a close up of the plug and wires it would help me out massively. It will mean taking the lid off your e box and unclipping the smaller plug connector out of the ecu.
 
Thanks for that advice it hasn't got what I need ideally if somebody on here has the same model and year could take a pic of the wires and plug that would be ideal or if anybody lives in the west country area I could come and take the pic .
 
That is perfect 100% what I needed, i cannot thank you and angel enough ,so so helpful I have all 18 wires in their correct location and that's that part sorted just need to connect up a few more sensor plugs around the engine bay and I will be there thanks again :thumbsup: :thumbsup:
 
You must log in or register to reply here.
Back
Top Bottom