I’m going to buy some 19” staggered tiger claws on Wednesday. Have any of you lovely lot had any experience fitting them? I’m wondering if I’m going to have to run spacers to get width/stance of it right to make them fill the arches and not look sunken in the arch. Also I was hoping just to get away with fitting lowering springs (I’m seeing most are about 30mm drop) but I’m worried incase that isn’t going to be low enough to close the arch gap. If I have to run coil overs will I need spacers not to just fatten the arches out but for the wheels to not foul the coilover shock body.
So basically after all that waffle;
How do tiger claws sit without spacers
If I need spacers what thickness front and back
Will springs be enough to close the gap or need coil overs
Do I need spacers to clear the coilover bodies
Thanks Dan
So basically after all that waffle;
How do tiger claws sit without spacers
If I need spacers what thickness front and back
Will springs be enough to close the gap or need coil overs
Do I need spacers to clear the coilover bodies
Thanks Dan