17" BMW Toora Alloys

sapman75

Member
Hello All

Need some advise please.

I have BMW 103 17" Alloys on my Z4 at present which with the recent weather I have a buckled front alloy :headbang:
Being that they are 10 years old now, they are a bit knackered anyhow :thumbsdown:
I wish to keep running 17" alloys for winter time and get some 18" alloys for summer use :thumbsup:

I have had a browse on the net and came across some 17" BMW Toora alloys (FITMENT 4X100 ET 40) which have been refurbished and painted black.

Would any of you Z4 veterans out there know if this will be as simply swapping the tyres over? Or am I out with the ET40 offset?

Thanks for your advice
 
sapman75 said:
Hello All

Need some advise please.

I have BMW 103 17" Alloys on my Z4 at present which with the recent weather I have a buckled front alloy :headbang:
Being that they are 10 years old now, they are a bit knackered anyhow :thumbsdown:
I wish to keep running 17" alloys for winter time and get some 18" alloys for summer use :thumbsup:

I have had a browse on the net and came across some 17" BMW Toora alloys (FITMENT 4X100 ET 40) which have been refurbished and painted black.

Would any of you Z4 veterans out there know if this will be as simply swapping the tyres over? Or am I out with the ET40 offset?

Thanks for your advice

just checked the date & it isn't april 1st :oops: 4x100 ET 40 wheels ? if you have a quick peep at your current alloys you will notice there are 5 wheelnuts
The offset of 40 might work but you need to look for 5x120 PCD :thumbsup:
 
Thanks Mr Winks

Here is the link on Piston heads, I've had a look and they are def 5 stud in the picture. Hmmm

http://www.pistonheads.com/classifieds/parts-and-plates/wheels-and-tyres/17-inch/toora-17in-bmw-fit-alloy-wheels-x4-newly-painted/1091342

Looks nice in Black?

I think in my haste I copied the spec from Ebay on another Toora wheel (must have been four stud) :poke:
 
Well providing they are 5x120 ET40 & you like em then they seem a good deal :) cheap for a set of mint 17;s :thumbsup:
 
They're probably available in lots of sizes/offsets/PCDs.

The only way to be sure is to email the seller and ask for the offset & PCD.
 
Back
Top Bottom