12V Feed in M engine bay??

S

snowfish

Member
All

I have a 12V device i am planning to fit at the front of the car.

Is there a feed that i can connect to? Is there an accessible fusebox with a spare connection or somewhere i can connect with an in line fuse?

Many Thanks
 
I could tell you what its for but that would put an end to the speculation.

I do need it to be on an ignition circuit i.e. only powered when the car is on. So if there is anyone that actually knows how to do this please let me know

For the rest of you, it could be this ....

BackToTheFuture02482.jpg
 
Any advice guys ? I have laser parking device I need to fit when I suss out how to get through the firewall. Checking through service records for my car, it`s had a Snooper hard-wired in at a main dealer back in `08, wonder if the wiring is still there.
 
mikem7709 said:
Any advice guys ? I have laser parking device I need to fit when I suss out how to get through the firewall. Checking through service records for my car, it`s had a Snooper hard-wired in at a main dealer back in `08, wonder if the wiring is still there.
Click to expand...

You should be able to get through the firewall on the passanger side behind the black electrical box under the bonnet, as you have to feed a wire through there to retrofit Cruise Control on later models.
 
srhutch said:
mikem7709 said:
Any advice guys ? I have laser parking device I need to fit when I suss out how to get through the firewall. Checking through service records for my car, it`s had a Snooper hard-wired in at a main dealer back in `08, wonder if the wiring is still there.
Click to expand...

You should be able to get through the firewall on the passanger side behind the black electrical box under the bonnet, as you have to feed a wire through there to retrofit Cruise Control on later models.
Click to expand...


Thanks, is it just a case of pulling the carpet back ? Does the glove box need to come out ??
 
You must log in or register to reply here.
Back
Top Bottom