002fa3 dme error

[agent851]

Hi.
After retrofiting 3 stage manifold and changing firmware from 160kW to 195W version using files from https://www.bimmerlabs.com/ the dme now reports error 002fa3. One of solutions that i've found on the internets is to recode the module with ncs expert. Unfortunately, for some reason, i can not select it as one of modules to read it. Inpa works fine with this module (live data/test work ok). Is there something in NCS profiles (I'm using ncsdummy profile) that i'm missing, or MSV70 can not be coded using NCS at all?

 

[Z4Mariner]

I am only starting my learning curve on coding, so take this as another Z4 newbie just trying to be helpful. I found this thread that might be of some interest: https://www.e90post.com/forums/showthread.php?t=1893514

I searched "bmw z4 002fa3 dme error" using Google.

 

[agent851]

I just might have glanced over the 6BMOT module as i was expecting for it to show up as MSV70. Thanks! Will check it out tomorow.

 

[agent851]

Tried connecting the laptop again.
Indeed there was 6BMOT module in list. I've tried to read it as MSV70.C02 (auto detected by ncs) and MSV70.C03 (this version was indicated when i connected with bmw scanner) to no avail. NCS just errors out when job is CODIERDATEN_LESEN with "wrong coding". I did not dear to do "SG_CODIEREN" without first reading it correctly.