Airbag B pillemodule 65.77 6945157

Checked the knee airbag, looks ok, thanks for the advice.

I had another go at programming. I managed to talk to the ecu this time in tool32. But when I went back to faults, the system time needs resetting on all 3 modules, central SIM and the 2 b pillars.

How do I reset the system time on all 3 modules at the same time in tools32, or do I have to do them separately?

Thanks
bigwinn said:
Do them one by one
Click to expand...
Thanks, I'll have another go later this week 👌
 
Mamba666 said:
Checked the knee airbag, looks ok, thanks for the advice.

I had another go at programming. I managed to talk to the left b pillar ecu this time in tool32. But when I went back to faults, the system time needs resetting on all 3 modules, central SIM and the 2 b pillars.

How do I reset the system time on all 3 modules at the same time in tools32, or do I have to do them separately?

Thanks
Click to expand...
Can only assume you are still not quite doing it right. I have never had to set the system time on anything other than the module I am replacing.
So all I can suggest is that you need to go through the Tool32 process for each module ?
 
Thanks enuff_zed. Still not working. I tried countless of times going to the procedure, it just doesn't want to sync the time. The module must be faulty. I've been trying to find another module on ebay and emailed a few breakers, no luck. BMW has discontinued it, so cannot buy a new one either.
Do you or you know anyone that has a spare passenger module?
 
You must log in or register to reply here.
Back
Top Bottom