Recent content by Zim11911

Hello the problem has been fixed. The DME was sending signals to the EWS and I was able to pull a compatible EWS from a scrape yard. After configuring it the problem has been solved now I have a k buss 87 issue so time to work on that one thank you for all the help, everyone.

Cool Thank you I will grab it and try it tonight.

Solved kinda!! I bypassed the EWS, and the car will start and run with it bypassed. The EWS sees the key but seems to not communicate correctly with the DME after I resynchronized them the problem seems to have gone away any idea why they would fall out of sync? Any way to prevent this replace...

Thank you for the welcome to the forms. When I put the key in the ignition all of the internal electronics turn on, and I hear a faint click come from the ECU box by the firewall and driver-side strut tower. I have used an industrial-rated fluke meter rated to 500 amps and placed it in line...

It looks like it is the immobilization circuit tested with a meter. I get the right signals to the module under the dash and nothing out. If I disconnect the starter and directly apply power to the starter with it still installed I can get it to engage properly.

I am looking into the Park Neutral interlock system. Thank you for that recommendation. I just replaced the battery with a new one on Thursday.

Just tried it no joy

Is there a code reader you would recommend I have seen the Airbags codes are a thing on these cars so one that can clear that code would be optimal.

tried it and still no joy

Hello, I do not have a code reader. Insert the key go to turn the car on all the lights on the dash turn on the blower motor runs, and the radio turns on. I can hear 1 or 2 faint clicks from the engine compartment. It sounds like they are coming from the relay box by the firewall on the drive...

Hello, I have a 2003 E85 Z4 2.5. Earlier this week the car started normally and had no known issues. As of Tuesday, it took several tries for the car to start, and then after I got home and tried to start it that evening it would not start. I have checked the battery 90% changed at 13.4 volts...