Recent content by LeakyTurnip

Freshly refurbished wheels and centre caps fitted and new reg plates added with the new reg. Nearing the end of my current tinkering!

And realised these were the originals from my Jan 2010 build!

Swapped out the salmon relays for some shiny new ones sourced from BMW dealer. 5 minutes job 😁.

I did, although not using the above, but using some extra strength gorilla grip stormproof duck tape on both sides of the hole. I expect that should do the trick! I also tripple checked the seals to make sure they were seated correctly too. So fingers crossed we're good for another 16 years!

With some difficulty! Like this the drivers door opens almost to the first notch and the wall has padding so the door doesn't get damaged. It's a little bit of a squeeze and requires some manoeuvring but it's doable 🤣

A productive Sunday! Replaced both tail lights for shiny new OEM versions - with the car having been garaged most of its life, they were more filled with dirt and dust than water—really simple job (if I hadn't had to fish out one of the push clips from the depths of the boot when it pinged...

Replaced both taillights for shiny new ones 😍

Making the most of some rare sunshine in these parts!

Thanks :) I've been looking at these relays now - are they they same part x 2 or two different part numbers? I'm thinking it's 2 x 12631742690

After lurking for a week or two, it's time to say hello! This is my new-to-me 2010 Z4 3.0i S Drive, which I picked up last week. She's a Jan 2010 build with 35.5k miles. It was owned for the last 14 years by a family member, and before that had one other owner. Except for a smaller aerial, it's...