Z4-forum.com

Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Alloy dilemma

Alloy wheels and tyre discussion
Post Reply
User avatar
sars
Lifer
Lifer
Posts: 7306
Joined: Sun Feb 21, 2010 11:37 am
Location: East Yorkshire

Alloy dilemma

Post by sars » Fri Nov 18, 2011 10:31 am

Having just fitted new winter boots to my standard 17" alloys, I have been on the prowl for set of MV3 of fleabay, however this is proving more difficult and expensive than I first thought, with most requiring refurbishment and/or tyres. A friend, another engineer, suggested I try this place http://www.rimstyle.com/ and now I have a real dilemma......never been sure of aftermarket wheels, especially replicas, however sticking to a known brand like BBS or Momo gives me a lot of re-assurance, misguided perhaps?

So I have narrowed it down to 3 choices, what do you lot think?

1. Momo Revenge 225/40/18 - ET35

Image

2. MAM RS2 225/40/18 - ET35

Image

3. BBS CF 225/40/18 - ET38

Image

Have a little concern over the BBS as the offset is 9mm higher @ ET38 than my 17" @ ET29, could this be a problem?
Sublime 2025 Black Sapphire Z4 M40i Handschalter 8)
Gone 2021 SFR Z4 M40i, 2017 Iridium SL400, 2015 435d xDrive Convertible, 2012 E350 CDi Convertible, 2010 DSB Z4 sdrive30i, 2008 Audi A4 Cabriolet, 2006 Phoenix Yellow Z4 2.5Si
Top
User avatar
JDM
Senior Member
Senior Member
Posts: 2148
Joined: Fri Feb 12, 2010 3:24 pm

Re: Alloy dilemma

Post by JDM » Fri Nov 18, 2011 10:36 am

Personally I would go for the 1st or the 3rd option but I think to be honest there are better options on the market for the E89..

Also would you not consider 19"... Go on you know it makes sense :D
04 3.0SE Roadster, 07 3.0Si Coupe, 12 2.0iSdrive M Sport... Gone but not forgotten

Now proud owner of an Audi TT TFSI S line, Misano Red Amplified black edition... Don't shoot me.

Image
Top
User avatar
sp3ctre
Site Admin
Site Admin
Posts: 7529
Joined: Thu Jun 14, 2007 7:29 pm
Contact:
Contact sp3ctre

Re: Alloy dilemma

Post by sp3ctre » Fri Nov 18, 2011 10:36 am

All 3 look nice, although I am generally not a fan of aftermarket... as aftermarket go though, v.nice... of the 3 I like the middle one least.
If you are looking for low cost UK insurance, visit our official Z4-forum insurance scheme
Top
AlienZed
Senior Member
Senior Member
Posts: 1439
Joined: Tue Oct 25, 2011 4:39 pm
Location: Tameside,Cheshire

Re: Alloy dilemma

Post by AlienZed » Fri Nov 18, 2011 10:41 am

I prefer no1 and 3,but 3 get the vote they look easier to clean. :)
Top
User avatar
VvrooomM
Senior Member
Senior Member
Posts: 1196
Joined: Fri Nov 20, 2009 7:42 pm

Alloy dilemma

Post by VvrooomM » Fri Nov 18, 2011 10:52 am

1 the other two look smaller somehow.


Sent from my iPhone using Tapatalk
Z4MC midnight blue with CSL's + VREDs, extd light sepang leather, folding mirrors, stubby aerial, retro bluetooth, prof nav, intravee ipod kit, storage and cup holders!!, laser LRC100, DSP hi-fi, storage and privacy.....is that it?
Top
User avatar
Adamski
Lifer
Lifer
Posts: 14280
Joined: Mon Jul 18, 2011 12:46 pm
Location: Edinburgh

Re: Alloy dilemma

Post by Adamski » Fri Nov 18, 2011 10:57 am

I would go for option 3. Great looking wheel and will be easiest to keep clean :thumbsup:
Gone: Z4M Coupé|Black Sapphire|OEM CSLs|Aero Skirts|OEM Strut Brace|Nav|Heated Seats|Logic 7 Pro Hi-fi|Bluetooth|Carbon Leather|PDC|BMW Assist|Stubby
Gone: Cherished 2003 3.0i Black Sapphire Roadster
Top
User avatar
sars
Lifer
Lifer
Posts: 7306
Joined: Sun Feb 21, 2010 11:37 am
Location: East Yorkshire

Re: Alloy dilemma

Post by sars » Fri Nov 18, 2011 2:37 pm

JDM wrote:Personally I would go for the 1st or the 3rd option but I think to be honest there are better options on the market for the E89..

Also would you not consider 19"... Go on you know it makes sense :D
What are the better options?

As for 19" not with the motorway miles I do, the tyre drone isn't pleasant for long periods at the wheel.

My preference so far is 3, 1 then 2, but as I have stated just worried about the offset being to high on the BBS
Sublime 2025 Black Sapphire Z4 M40i Handschalter 8)
Gone 2021 SFR Z4 M40i, 2017 Iridium SL400, 2015 435d xDrive Convertible, 2012 E350 CDi Convertible, 2010 DSB Z4 sdrive30i, 2008 Audi A4 Cabriolet, 2006 Phoenix Yellow Z4 2.5Si
Top
User avatar
JDM
Senior Member
Senior Member
Posts: 2148
Joined: Fri Feb 12, 2010 3:24 pm

Re: Alloy dilemma

Post by JDM » Fri Nov 18, 2011 3:22 pm

sars wrote:
JDM wrote:Personally I would go for the 1st or the 3rd option but I think to be honest there are better options on the market for the E89..

Also would you not consider 19"... Go on you know it makes sense :D
What are the better options?

As for 19" not with the motorway miles I do, the tyre drone isn't pleasant for long periods at the wheel.

My preference so far is 3, 1 then 2, but as I have stated just worried about the offset being to high on the BBS
How about these :D

Image

Image

Or these...

Image

Or these would look good in black...

Image
04 3.0SE Roadster, 07 3.0Si Coupe, 12 2.0iSdrive M Sport... Gone but not forgotten

Now proud owner of an Audi TT TFSI S line, Misano Red Amplified black edition... Don't shoot me.

Image
Top
User avatar
tldevon
Member
Member
Posts: 104
Joined: Thu Oct 27, 2011 10:31 pm
Location: Exmouth

Re: Alloy dilemma

Post by tldevon » Fri Nov 18, 2011 4:11 pm

If it's not too lat try a company called BMautosport @ bmautosport.co.uk
they have a good range of new & referb also a good guy to get a bit of discount with :) :)
Top
User avatar
sars
Lifer
Lifer
Posts: 7306
Joined: Sun Feb 21, 2010 11:37 am
Location: East Yorkshire

Re: Alloy dilemma

Post by sars » Fri Nov 18, 2011 4:19 pm

Thanks JDM, yes the CSL's do look good on the e89, however all the wheels you've picked are 19" :poke:
Sublime 2025 Black Sapphire Z4 M40i Handschalter 8)
Gone 2021 SFR Z4 M40i, 2017 Iridium SL400, 2015 435d xDrive Convertible, 2012 E350 CDi Convertible, 2010 DSB Z4 sdrive30i, 2008 Audi A4 Cabriolet, 2006 Phoenix Yellow Z4 2.5Si
Top
billygilly
Member
Member
Posts: 969
Joined: Thu Jul 16, 2009 10:20 pm

Re: Alloy dilemma

Post by billygilly » Fri Nov 18, 2011 4:21 pm

Number 1, but like someone said nightmare to clean
Top
Post Reply

Return to “Wheels & Tyres”