Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Is this spoiler factory fit…?
-
- Lifer
- Posts: 11127
- Joined: Tue Feb 10, 2015 10:27 pm
Is this spoiler factory fit…?
Hey,
Does anyone know if these bootlid spoilers are a factory fit from an option list at the time…? Not sure I like it, it’s not horrific but I’d like to get it off so I can decide, i can’t see any bolts for it so I’m assuming it’s bonded on, I’ve had a gentle try at removing it but it’s well stuck on there hence my question. Last thing I want to do is damage the bootlid and have to paint it as the rest of the car is original paint. Hot water and cheese wire with a slowly slowly catchy monkey method I guess.
Does anyone know if these bootlid spoilers are a factory fit from an option list at the time…? Not sure I like it, it’s not horrific but I’d like to get it off so I can decide, i can’t see any bolts for it so I’m assuming it’s bonded on, I’ve had a gentle try at removing it but it’s well stuck on there hence my question. Last thing I want to do is damage the bootlid and have to paint it as the rest of the car is original paint. Hot water and cheese wire with a slowly slowly catchy monkey method I guess.
- Attachments
-
- 5DF1D4EF-F5B6-41FE-B9DF-6C9B5402D655.jpeg (209.51 KiB) Viewed 642 times
M roady...OEM CSL’s, strut brace, Remus back boxes, ZHP
MR2 MK 2
E89 35i project car...mapped 365bhp, M4 stoppers & wheels, KWV3’s, H&R front ARB, M3 front arms, strut brace Eisenmann cat back race exhaust, VRSF downpipes inbound
E89 35is
G29
MR2 MK 2
E89 35i project car...mapped 365bhp, M4 stoppers & wheels, KWV3’s, H&R front ARB, M3 front arms, strut brace Eisenmann cat back race exhaust, VRSF downpipes inbound
E89 35is
G29
- Phoenixboy
- Senior Member
- Posts: 2118
- Joined: Fri Nov 11, 2016 9:07 pm
- Location: english riviera
Is this spoiler factory fit…?
I know what you mean, not a fan of spoilers.
no expert, but you will do well to remove it without damaging paintwork, but it depends what they used.
as you say, some gentle heat may loosen enough to remove...
no expert, but you will do well to remove it without damaging paintwork, but it depends what they used.
as you say, some gentle heat may loosen enough to remove...
E89 s drive 30i manual/gone
space grey
Carbon interior trim
19" Veeman FS 25`s
cruise control
m sport seats
stubby
led halo bulbs
z4 forum sticker, for added power.
OEM wind deflector
Gone, E85 Ruby Black.
space grey
Carbon interior trim
19" Veeman FS 25`s
cruise control
m sport seats
stubby
led halo bulbs
z4 forum sticker, for added power.
OEM wind deflector
Gone, E85 Ruby Black.
-
- Member
- Posts: 833
- Joined: Mon Aug 20, 2018 11:12 am
Is this spoiler factory fit…?
It is the OEM Aero spoiler and you are correct it is bonded on. It will be difficult to remove without damaging the boot. If you do decide to remove it, I would be interested in purchasing it as I also have an imola red M and I like the look.
BMW E85 Z4M
BMW E85 Z4 2.5
Gone Z4 E85 3.0
BMW E85 Z4 2.5
Gone Z4 E85 3.0
- enuff_zed
- Lifer
- Posts: 15142
- Joined: Wed Oct 26, 2016 11:05 am
- Location: Attleborough, Norfolk
Is this spoiler factory fit…?
Well I understand that you'd both want to keep your cars original, but why not simply swap boot lids?
- pvr
- Legend
- Posts: 26401
- Joined: Fri Jun 15, 2007 12:27 pm
- Location: South East UK
Is this spoiler factory fit…?
That is the only way to do it. I removed one and had to put it back as the paint underneath was mank after the removal
Current:
911-50 Black - unique spec
X5M - 575 hp of fun in a V8
Abarth 595 Comp.
Golf Clipper - collectors item
Z4 3.0si Black Sapphire
VW ID.3
Previous:
Z4M Silver Grey - non flimper spec (gone to Bing)
Z4 3.0 Toledo
911-50 Black - unique spec
X5M - 575 hp of fun in a V8
Abarth 595 Comp.
Golf Clipper - collectors item
Z4 3.0si Black Sapphire
VW ID.3
Previous:
Z4M Silver Grey - non flimper spec (gone to Bing)
Z4 3.0 Toledo
-
- Lifer
- Posts: 11127
- Joined: Tue Feb 10, 2015 10:27 pm
Is this spoiler factory fit…?
Too mank for detailing to deal with it Paul...?pvr wrote: ↑Tue Mar 21, 2023 11:18 amThat is the only way to do it. I removed one and had to put it back as the paint underneath was mank after the removal
If it comes ro it I'll let you know MKZ.
M roady...OEM CSL’s, strut brace, Remus back boxes, ZHP
MR2 MK 2
E89 35i project car...mapped 365bhp, M4 stoppers & wheels, KWV3’s, H&R front ARB, M3 front arms, strut brace Eisenmann cat back race exhaust, VRSF downpipes inbound
E89 35is
G29
MR2 MK 2
E89 35i project car...mapped 365bhp, M4 stoppers & wheels, KWV3’s, H&R front ARB, M3 front arms, strut brace Eisenmann cat back race exhaust, VRSF downpipes inbound
E89 35is
G29
- pvr
- Legend
- Posts: 26401
- Joined: Fri Jun 15, 2007 12:27 pm
- Location: South East UK
Is this spoiler factory fit…?
Top layer (clear coat) was attacked by the glue, so even after polishing you could see where it had been (like a shadow).
Current:
911-50 Black - unique spec
X5M - 575 hp of fun in a V8
Abarth 595 Comp.
Golf Clipper - collectors item
Z4 3.0si Black Sapphire
VW ID.3
Previous:
Z4M Silver Grey - non flimper spec (gone to Bing)
Z4 3.0 Toledo
911-50 Black - unique spec
X5M - 575 hp of fun in a V8
Abarth 595 Comp.
Golf Clipper - collectors item
Z4 3.0si Black Sapphire
VW ID.3
Previous:
Z4M Silver Grey - non flimper spec (gone to Bing)
Z4 3.0 Toledo
- B21
- Lifer
- Posts: 5622
- Joined: Tue Oct 05, 2021 7:15 pm
- Location: In my Banana Yellow Space Shuttle...somewhere over Southern Caledonia
Is this spoiler factory fit…?
FWIW I think it’s one of the best spoiler / car bottom combos..even though it’s not small I always smile when I see one out..but each to their own..
We choose to go to on with this endeavour at this time and do the other things, not because they are easy, but because they are hard…
A very modified Atacama Yellow 35is
A very modified Atacama Yellow 35is
- pvr
- Legend
- Posts: 26401
- Joined: Fri Jun 15, 2007 12:27 pm
- Location: South East UK
Is this spoiler factory fit…?
You mean it looks cr*p
Current:
911-50 Black - unique spec
X5M - 575 hp of fun in a V8
Abarth 595 Comp.
Golf Clipper - collectors item
Z4 3.0si Black Sapphire
VW ID.3
Previous:
Z4M Silver Grey - non flimper spec (gone to Bing)
Z4 3.0 Toledo
911-50 Black - unique spec
X5M - 575 hp of fun in a V8
Abarth 595 Comp.
Golf Clipper - collectors item
Z4 3.0si Black Sapphire
VW ID.3
Previous:
Z4M Silver Grey - non flimper spec (gone to Bing)
Z4 3.0 Toledo
-
- Lifer
- Posts: 11127
- Joined: Tue Feb 10, 2015 10:27 pm
Is this spoiler factory fit…?
M roady...OEM CSL’s, strut brace, Remus back boxes, ZHP
MR2 MK 2
E89 35i project car...mapped 365bhp, M4 stoppers & wheels, KWV3’s, H&R front ARB, M3 front arms, strut brace Eisenmann cat back race exhaust, VRSF downpipes inbound
E89 35is
G29
MR2 MK 2
E89 35i project car...mapped 365bhp, M4 stoppers & wheels, KWV3’s, H&R front ARB, M3 front arms, strut brace Eisenmann cat back race exhaust, VRSF downpipes inbound
E89 35is
G29
-
- Lifer
- Posts: 3289
- Joined: Sun Feb 10, 2019 2:10 pm
- Location: Bristol/Bath
Is this spoiler factory fit…?
Personally, I marginally prefer the clean look, but not to the extent that’d I’d be trying to remove the spoiler - especially if it left the factory like that.
Your photo has reminded me that I desperately need to clean my exhaust tips though!
Your photo has reminded me that I desperately need to clean my exhaust tips though!
Alpina Roadster S Lux no. 204 (1 of 15 uk cars in Alpina Blue)
Previous Z4’s :E89 30i, E89 20i, E85 3.0Si (X4) E85 3.0i, E86 3.0 Si, E85 2.5si, E85 2.5i
Previous Z4’s :E89 30i, E89 20i, E85 3.0Si (X4) E85 3.0i, E86 3.0 Si, E85 2.5si, E85 2.5i
- pvr
- Legend
- Posts: 26401
- Joined: Fri Jun 15, 2007 12:27 pm
- Location: South East UK
Is this spoiler factory fit…?
They were dealerfit, not factory fit
Current:
911-50 Black - unique spec
X5M - 575 hp of fun in a V8
Abarth 595 Comp.
Golf Clipper - collectors item
Z4 3.0si Black Sapphire
VW ID.3
Previous:
Z4M Silver Grey - non flimper spec (gone to Bing)
Z4 3.0 Toledo
911-50 Black - unique spec
X5M - 575 hp of fun in a V8
Abarth 595 Comp.
Golf Clipper - collectors item
Z4 3.0si Black Sapphire
VW ID.3
Previous:
Z4M Silver Grey - non flimper spec (gone to Bing)
Z4 3.0 Toledo
-
- Lifer
- Posts: 11127
- Joined: Tue Feb 10, 2015 10:27 pm
Is this spoiler factory fit…?
That's pretty much where I am with it True.
Being on here isn't getting those tips done is it.....!
M roady...OEM CSL’s, strut brace, Remus back boxes, ZHP
MR2 MK 2
E89 35i project car...mapped 365bhp, M4 stoppers & wheels, KWV3’s, H&R front ARB, M3 front arms, strut brace Eisenmann cat back race exhaust, VRSF downpipes inbound
E89 35is
G29
MR2 MK 2
E89 35i project car...mapped 365bhp, M4 stoppers & wheels, KWV3’s, H&R front ARB, M3 front arms, strut brace Eisenmann cat back race exhaust, VRSF downpipes inbound
E89 35is
G29
-
- Lifer
- Posts: 3289
- Joined: Sun Feb 10, 2019 2:10 pm
- Location: Bristol/Bath
Is this spoiler factory fit…?
I’m in London for the Mrs latest chemo John, no polishing today… a job for the weekend
Alpina Roadster S Lux no. 204 (1 of 15 uk cars in Alpina Blue)
Previous Z4’s :E89 30i, E89 20i, E85 3.0Si (X4) E85 3.0i, E86 3.0 Si, E85 2.5si, E85 2.5i
Previous Z4’s :E89 30i, E89 20i, E85 3.0Si (X4) E85 3.0i, E86 3.0 Si, E85 2.5si, E85 2.5i
-
- Lifer
- Posts: 11127
- Joined: Tue Feb 10, 2015 10:27 pm
Is this spoiler factory fit…?
Really sorry to read that True, I hope all goes well with a positive outcome. Horrible time for you.
Best to you both.
M roady...OEM CSL’s, strut brace, Remus back boxes, ZHP
MR2 MK 2
E89 35i project car...mapped 365bhp, M4 stoppers & wheels, KWV3’s, H&R front ARB, M3 front arms, strut brace Eisenmann cat back race exhaust, VRSF downpipes inbound
E89 35is
G29
MR2 MK 2
E89 35i project car...mapped 365bhp, M4 stoppers & wheels, KWV3’s, H&R front ARB, M3 front arms, strut brace Eisenmann cat back race exhaust, VRSF downpipes inbound
E89 35is
G29