BMW Z4 E85 Simota carbon fibre induction filter *reduced*

BMW Z4 Simota carbon fibre induction air filter and oil breather filter
used but in good clean condition
will fit most straight 6 petrol BMW's but please check first
These are very rare and very sought after, but if you know what it is your are looking at then you know that anyway.

£120 will consider reasonable offers

collection from mostyn, north wales.
but can post for cost of p+p
 

Attachments

  • IMG_20210604_221040.jpg
    IMG_20210604_221040.jpg
    132.3 KB · Views: 1,079
  • IMG_20210604_221102.jpg
    IMG_20210604_221102.jpg
    97.7 KB · Views: 1,079
  • IMG_20210604_221125.jpg
    IMG_20210604_221125.jpg
    126.5 KB · Views: 1,079
  • IMG_20210604_221150.jpg
    IMG_20210604_221150.jpg
    106.5 KB · Views: 1,079
  • IMG_20210604_221251.jpg
    IMG_20210604_221251.jpg
    127.7 KB · Views: 1,079
It should fit yours, the only thing that may be different is the diameter of the maf, if you want to be sure just measure the diameter of your original air box with some verniers and I'll get the diameter of this one
 
bedfordboss said:
It should fit yours, the only thing that may be different is the diameter of the maf, if you want to be sure just measure the diameter of your original air box with some verniers and I'll get the diameter of this one

Hi, I just checked. It seems the MAF is actually located in part of the original air box so not just a case of bolting on a new filter unfortunately.

I need to pass. Sorry, I’m sure it’ll sell no problems!
 
mr.tourette said:
think this will only fit pre facelifts unless you can 3d print a new maf holder for si models

Hi Mr Tourette as you know I’ve been looking for an AFE for a while for my 07 3.0SI e86 would this fit please mate? Or if not is it hard to make fit?

Cheers :)
 
Plumby321 said:
mr.tourette said:
think this will only fit pre facelifts unless you can 3d print a new maf holder for si models

Hi Mr Tourette as you know I’ve been looking for an AFE for a while for my 07 3.0SI e86 would this fit please mate? Or if not is it hard to make fit?

Cheers :)

It won’t fit - you’d need to somehow create a mount for the MAF in some custom pipe work.

This is why the AFE is more expensive - it has the pipe work included.
 
Darkangelv2 said:
Plumby321 said:
mr.tourette said:
think this will only fit pre facelifts unless you can 3d print a new maf holder for si models

Hi Mr Tourette as you know I’ve been looking for an AFE for a while for my 07 3.0SI e86 would this fit please mate? Or if not is it hard to make fit?

Cheers :)

It won’t fit - you’d need to somehow create a mount for the MAF in some custom pipe work.

This is why the AFE is more expensive - it has the pipe work included.
Randomly I have that piece of pipework. I'm removing the cone filter this weekend and it comes with the pipe. Let me know if I can help. 20210515_100856.jpg
 
idej_z4 said:
Darkangelv2 said:
Plumby321 said:
Hi Mr Tourette as you know I’ve been looking for an AFE for a while for my 07 3.0SI e86 would this fit please mate? Or if not is it hard to make fit?

Cheers :)

It won’t fit - you’d need to somehow create a mount for the MAF in some custom pipe work.

This is why the AFE is more expensive - it has the pipe work included.
Randomly I have that piece of pipework. I'm removing the cone filter this weekend and it comes with the pipe. Let me know if I can help. 20210515_100856.jpg



I need that maf sensor pipe, where did you get that ! 😁
 
PODD_ZILLA said:
idej_z4 said:
Darkangelv2 said:
It won’t fit - you’d need to somehow create a mount for the MAF in some custom pipe work.

This is why the AFE is more expensive - it has the pipe work included.
Randomly I have that piece of pipework. I'm removing the cone filter this weekend and it comes with the pipe. Let me know if I can help. 20210515_100856.jpg



I need that maf sensor pipe, where did you get that ! 😁
Bought it from someone on the forum, but it is now sold. I think it orginally came from America.
 
PODD_ZILLA said:
idej_z4 said:
Darkangelv2 said:
It won’t fit - you’d need to somehow create a mount for the MAF in some custom pipe work.

This is why the AFE is more expensive - it has the pipe work included.
Randomly I have that piece of pipework. I'm removing the cone filter this weekend and it comes with the pipe. Let me know if I can help. 20210515_100856.jpg



I need that maf sensor pipe, where did you get that ! 😁

Best I can do for you :thumbsup:
 

Attachments

  • 0692C8A1-4E92-467E-82FD-F90FDA3C7E5B.jpeg
    0692C8A1-4E92-467E-82FD-F90FDA3C7E5B.jpeg
    98.3 KB · Views: 221
  • B6B34A40-C382-4DE4-A0DC-F0CA189DF7F9.jpeg
    B6B34A40-C382-4DE4-A0DC-F0CA189DF7F9.jpeg
    137.3 KB · Views: 221
Argyll Andy said:
PODD_ZILLA said:
idej_z4 said:
Randomly I have that piece of pipework. I'm removing the cone filter this weekend and it comes with the pipe. Let me know if I can help. 20210515_100856.jpg



I need that maf sensor pipe, where did you get that ! 😁

Best I can do for you :thumbsup:

Awesome ! How much would you like for it including postage ? 😁 I’m Uk mainland just incase you aren’t
 
Back
Top Bottom