Wheels from an F10?

[ARC]

on about swapping to some style 350's from my dads 5 series m sport,

I know they'll fit as far as in the arches and tyres and all that lot but the only thing that's concerned me is the bolt thread:

Info is as follows :

5 Series F10/F11 = PCD 5x120, centre bore 72.5mm and M14x1.25 bolt thread. ET 33-44

Z4 E85/86 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 45-52

But I don't really understand all the bolt thread stuff means? Can someone shed some light

 

[srhutch]

Use your existing bolts and that will be fine. Try and swap them over and they won't fit.

I will assume you have checked the offsets out.

 

[JimF]

Swap them over, use your existing bolts and get some pictures up!

 

[ekimj10]

M14x1.25 bolt thread

M12x1.5 bolt thread

You have two lots of totally different sized bolts, the 5 series are 14 mm outside diameter with a thread pitch of 1.25 mm, the Z's are 12 mm outside diameter with a thread pitch of 1.25 mm.