I have 2 different front wheel arch liners. The inspection panel on the near side has tabs and plastic fasteners whereas the off side has screws all around as you can see in this photograph. Is one aftermarket or did BMW change it up?
I have yet to test drive the car on the new 19" wheels but there is clearly contact with the offside liner even when stationary whilst the wheel is turned. It clears straight and on full lock but this looks like I will need to heat mould the liner to get clearance.
Atomic CSL with Michellin PS4S
225/35/19
265/30/19
8.5J ET38
9.5J ET45
To be set at 34 PSI
I have yet to test drive the car on the new 19" wheels but there is clearly contact with the offside liner even when stationary whilst the wheel is turned. It clears straight and on full lock but this looks like I will need to heat mould the liner to get clearance.
Atomic CSL with Michellin PS4S
225/35/19
265/30/19
8.5J ET38
9.5J ET45
To be set at 34 PSI
