UK sourced camber bolts and solid calliper guide bushes?

H

Hysteric

Member
Hi all, I am after a set of camber bolts and the solid caliper guide bush for my MC - the only place I can find the guide bushes are Turner Motorsports across the pond. Their cambers bolts come highly recommended although they honestly just look like 12mm bolts with a couple of washers!

So looking for any recommendations for locally sourced options (I am after about 3 deg negative) and solid guide bushes.

Cheers for help in advance.
 
A bolt is a bolt. I had an idle look and they're not eccentric as far as I can see so, yes, they're just bolts. The only notable thing about them is that they're 10.9 grade rather than common 8.8 grade. I can't tell if the pitch is standard course rather than fine, but that can be found from the existing ones. Look to be about 20mm long from the pics. Work out what you need and buy them from eBay (unless, like me, you have a local Fasteners place that stocks every last size in every last spec in little boxes on shelves!)

As for the spacers - it's not even as if they're machined shims but just, as you say, washers. (I found the installation instructions; they admit to them being washers!)

As an engineer I find it funny that people can flog ordinary hardware as special or magic at all, and even funnier when people refer to them as if they're made by Jebus himself.
 
bugger thanks for point out.

still on the hunt for solid bushes then if anyone can point me in the right direction.
 
You must log in or register to reply here.
Back
Top Bottom