jicholasnackson
Member
All the parts needed for sound generator retrofit on a 2.5si (N52 engine).
1x rubber boot
1x large jubilee (just re-use one off your current boot)
2x small jubilees
1x torx screw (for fixing sound generator)
1x sound generator
1x sound conducting medium (reasonably new, only 6 months old) - that's the official bmw name, its the pipe with the foam in, both foams will be in, I recommend taking the one nearest the firewall out
1x firewall grommet
Sold.
Instructions can be found here: http://www.z4-forum.com/forum/viewtopic.php?f=2&t=19134&hilit=sound+generator+2.5si (credit to wildbill)
1x rubber boot
1x large jubilee (just re-use one off your current boot)
2x small jubilees
1x torx screw (for fixing sound generator)
1x sound generator
1x sound conducting medium (reasonably new, only 6 months old) - that's the official bmw name, its the pipe with the foam in, both foams will be in, I recommend taking the one nearest the firewall out
1x firewall grommet
Sold.
Instructions can be found here: http://www.z4-forum.com/forum/viewtopic.php?f=2&t=19134&hilit=sound+generator+2.5si (credit to wildbill)