Retro Cruise on post 04 (with all the cables!)

[Anonymous]

I'm going to try and retro my cruise tonight on a 55 reg Z.

I probably should have read the instructions before buying as it appears more effort than 'plug n play'. It even looks like I have to run a wire all the way into the engine!! wtf!?

Has anyone done this already? Is it easy or am I being a drama queen :dizzy:

 

[sherlock]

there was a post on here a couple of weeks ago with instruction and diagrams. I will try and find it for you

 

[aquazi]

Have a look at these two threads:
http://www.z4-forum.com/forum/viewtopic.php?f=2&t=15323&hilit=cruise
http://www.z4-forum.com/forum/viewtopic.php?f=2&t=16592&hilit=cruise&start=15

I still need to fit mine - will do it when the weather picks up as i think it may take me a couple of hours.

 

[Anonymous]

Alot of reading to do on them threads! Cheers guys! hopefully it will put my mind at ease

 

[glastoveteran]

Yeah I've done it - wasn't too tricky until I ran into the confusion of which pin to connect to, but once we finally found that out it's all in and working nicely.

Drop me a line if you need any specific pointers.

 

[Anonymous]

Yeah I've done it - wasn't too tricky until I ran into the confusion of which pin to connect to, but once we finally found that out it's all in and working nicely.

Drop me a line if you need any specific pointers.

Thanks. I'm a complete novice at this sort of thing so it will definately be a good challenge
I'll try and take some pics too for a Post 04 retro.