Remove E85 kidney grille

[marypoppins]

Have seen the BM bulletin with reference to removing these however they seem very reluctant to budge when following the instructions. Any tips as i dont want to break them?

 

[markeg]

They should just pop out, unless someone's added so additional "fixing"? I just ease mine out from the top left-hand edge, and then work my way round.

 

[Swiftly]

As markeg has said, mine also just pop out, infact a tad too easy really

 

[andysat]

I was in the same boat as you -just sprayed wd40 (don't know if it helped but seemed to).

 

[srhutch]

Hold two of the slats at the bottom and then lifting slightly pull.

 

[Bing]

Hold two of the slats at the bottom and then lifting slightly pull.

This is how I do it. The 'pull' needs to be a decent yank. They won't break

 

[gallaghb]

Hold two of the slats at the bottom and then lifting slightly pull.

This is how I do it. The 'pull' needs to be a decent yank. They won't break

Now you've said that they will break!

I thought the same though when doing mine, just closed my eyes and gave it a good yank and came out fine

 

[Stuart Truman]

Hold two of the slats at the bottom and then lifting slightly pull.

This is how I do it. The 'pull' needs to be a decent yank. They won't break

+2 lift it up with a reasonable pressure and it shouldn't be too tough to pull out. Certainly not enough to break it. If it doesn't pull, don't force it