Poorboys Black hole and AG SRP together ?

R

Rob_benton

Member
 Bedfordshire
Hi

I've just ordered some Poorboys Back Hole.

I've read that some people put autoglym super resin polish on to the paintwork first, and then put black hole on top.
Is this a good idea ?
I presume the srp would slightly cut the paint with a bit of filling and the black hole would top up the filling
, but would the srp fill all the swirls and not leave black hole anything to fill ?

And finally, I have Autoglym HD wax on my black paintwork at the moment. Do I need to strip it all back to bare paint or can I put down a layer of black boys and HD Wax on top if the existing HD wax ?

Thanks

Rob
 
Hi Rob!

i wouldn't worry about AG SRP cutting as i understand the new formular on has very very slight cutting properties and is much more of a filler in my view. I have also used their HD was for many years as well! brilliant product! tbh if your wanting to get the best results personally i would give the car a good wash to stip everything off and then apply the srp followed by the black hole and then some more HD wax!

Good Luck!

Rob (as well)
 
I can't imagine, as both SRP and PBBH have filler properties that BH will do anything. I'd use a good polish to minimise scratches/lines/anything left and then apply PB BH or SRP and then wax/selant over the top. Come the new year when the weather improves, I'm going the whole hog and DA'ing the whole car with a mild cutting compound, then high gloss polish, then sealant, using PBBH only for masking light swirls for the rest of the year before I repeat the process again.
 
To strip off existing wax might be worth spending 30 minutes claying the car. Remove all contaminants and give the sealant/ wax a better surface to bond to.

I tried it for the first time 4-5 weeks ago, was a bit nervous, but really easy to do and fantastic results.

As said, SRP then PBBH will be fine. But make sure you apply a sealant/ wax on top. Being that winter is coming, a sealant tends to be harder wearing, something like Chemical Guys Jetseal on top of PBBH will do a great job :thumbsup:
 
Give it a wash with fairy liquid to remove all the the old wax etc. I always then give it a 2nd wash before it drys with a decent shampoo like born to me mild etc.
 
I use both with and then seal, anybody who has seen my car at the meet will agree that its not caused me any problems, and is easy to apply. :thumbsup:
 
You must log in or register to reply here.
Back
Top Bottom