MV2 WHEEL CENTRES

marypoppins

Active member
 Preston
I am looking to replace the wheel centre caps on the Zed.The MV2's that are currently fitted seem to have a sticker in the centre rather than a formed resin cap. I will be taking the wheels of shortly to carry out some cleaning and painting of the rear hubs but was wondering if there is a replacement cap for this type of wheel rather than what appears to be a " sticker"
 
I swapped mine out at the weekend on Z4M and swapped the emblems which were recessed with newer ones which are more similar to the wing badge - ie have a slight dome.
 
marypoppins said:
I am looking to replace the wheel centre caps on the Zed.The MV2's that are currently fitted seem to have a sticker in the centre rather than a formed resin cap. I will be taking the wheels of shortly to carry out some cleaning and painting of the rear hubs but was wondering if there is a replacement cap for this type of wheel rather than what appears to be a " sticker"

Brought some stickers for my Series I alloys which had faded badly. Came from an eBay seller in the Far East but are genuine BMW. They are lightweight metal with a slightly dome centre. Easy to stick on and they were around £15 including postage for a set of four and 64.5mm diameter and I intend to get another set for my MV2's on my Zed which are the same diameter.
 
marypoppins said:
Ok are they a "knock in" cap or a sticker? I still dont have a definitive answer.

They are a sticker but very light metal and slightly domned in the centre. Peel off paper on the back and stick really well over the existing badge. The eBay seller is jp_coolcar and they are now £17.66 for a set of 4 including postage. He also sells ones on plastic inserts for £29.88 for a set of 4 if you prefer. Genuine BMW products and good service.
 
Back
Top Bottom