MFSW wire

[Johnbmwz4]

Hi anyone know the product code for the wire that connects the right hand MFSW controls to the slip ring on the steering column? Bmw are acting silly and want a vin number of a car with one factory fitted before they can find it on their system and order me one.
Thanks

 

[Zoomer]

Have you looked on REALOEM. The wire may not be available separately but you always can show them this

https://www.realoem.com/bmw/enUS/showparts?id=BT52-EUR-04-2003-E85-BMW-Z4_30i&diagId=03_0352

my dealer always asks for reg as they feel there might have been changes depending on build date so work this way. Hope this helps

 

[Johnbmwz4]

Yeah tried that but it doesn't show it separately. Ive just picked a random Z4 number plate from AT which has a MFSW fitted so sent that reg number this morning so we will see if they can source it now.

 

[IAmOrion]

I literally just did my MFSW about 3 days ago - I couldn't find the required wire anywhere! (For reference, the part number is 61120394848)

However, any 2 pieces of wire will do the trick! I already had the connectors from a diff project (They use a typical MQS connector).

You can buy some here: http://www.automotiveconnectors.com/te-amp-mqs-socket-terminal-02-05mm.html

Or if you want, PM me, and I can post you a 30cm piece of 2 core wire, with the connectors attached one end, and bare wires the other (the bmw kit gives you scotch-locks for joining the wires at the head light controls - you'll have to source theses yourself as I don't think I've got any left atm)

Not sure if you've seen this already too, but this is the guide I took a quick look over before doing mine: https://z4-forum.com/forum/viewtopic.php?f=26&t=16422