HEL Hose Specification?

[longshaw]

Hi All, I have a potential MOT fail for "Front brake flexi hoses split" and "Rear Brak flexi hoses split"
So I've just read two great threads, on "how to" replace with HEL braided :
https://z4-forum.com/forum/viewtopic.php?f=3&t=114948&p=1652925&hilit=brake+corrosion#p1652925
https://z4-forum.com/forum/viewtopic.php?f=2&t=79253&p=1182277&hilit=brake+hose+replace#p1182277

I am finding the REAR spec as follows (Although I as per thread I will choose 720mm):

Options: Fitting 1: Swivel Circlip Female M10 x 1.00 , Fitting 1 Angle: Straight , Fitting 2: Swivel Male M10 x 1.00 , Fitting 2 Angle: Straight , Support 1: Bobbin Grommet , Support 2: Circlip Small Nut , Colour: Red , Ferrules: No , Length: 700mm

Notes:
Please can you turn down the O.D portion of the female circlip swivel's to 14mm (As arranged with Ollie this morning via phone) too alow it to pass thru existing chassis brackets.

This diagram

However, I cannot find the FRONT spec?

Any ideas? thanks in advance

 

[mjennings23]

They have an 'off the shelf' kit for the fronts, so if you contact them just say you want the standard Z4 fronts and the specific rears detailed above.

 

[longshaw]

They have an 'off the shelf' kit for the fronts, so if you contact them just say you want the standard Z4 fronts and the specific rears detailed above.

Good shout! I have found them now.
I hope they look the same, although I dont see why they would look and different... or be able to tell once fitted :rofl:
Thanks