FS: Complete OEM PDC retrofit kit

[mrlozzer]

Looks like the zed is leaving in a couple of days...

The new owner doesn't want the extra parts, so first up for sale is a pre-facelift rear PDC bumper, freshly painted by my local body shop in Sterling Grey. Plus, all of the kit for a PDC retrofit: four OEM sensors (used, but freshly repainted), a PDC module (used), PDC gong (used) and loom (brand new) - plus a printout of the BMW fitting instructions.

Apologies for the photo - just picked the bumper up from the bodyshop where it's been stored, so it's very dusty...

Don't really want to be sending bumper for obvious reasons. The paint is perfect (plenty of pics of my car kicking round to show how good my local body shop's painters are). Cost me £250 all in - not counting the paint job. Looking for £125 and would prefer pickup.

Also have a Bimmian illuminated knob (I fitted an illuminated ZHP instead). This has a good weight to it and comes with a selection of inserts for 5 or 6 speed. Also have a Storm Motorwerks V1 brushed stainless steel handbrake. This has a small scratch on the underside (see pic)...

£30 each or £50 the pair plus postage... * NOW SOLD *

I've moved the details of the anti roll bars onto a new thread...

http://www.z4-forum.com/forum/viewtopic.php?f=7&t=49203

 

[bmrich15]

Will the front and rear ARB fit my 2004 E85 2.5?

If so I will take them.........how much posted?

Is the stormwerks knob 6 speed?

Thanks

 

[mrlozzer]

Will the front and rear ARB fit my 2004 E85 2.5?

If so I will take them.........how much posted?

Is the stormwerks knob 6 speed?

Thanks

Oops... just photographed the stuff this morning. I got it the wrong way around. The handbrake is Storm Motorwerks - the gear knob is a Bimmian item. I've posted pics in my original post plus prices.

So far as the ARBs go, I'm no expert - I'd seen on the internet that others have done it and my garage worked out what bushes etc I'd need. Just looked at RealOEM website this morning. So far as I can tell the part numbers for the 2004 2.5i and 2003 3.0i front and rear ARBs are identical, so I'd guess there should be no problem... would be best to check though...

 

[bradmarsh1989]

Im interested in the set of handbrake and gear knob. pm me.

 

[mrlozzer]

Gear knob and handbrake cover now sold. PDC kit and ARBs / polybushes still available...

 

[mrlozzer]

Will the front and rear ARB fit my 2004 E85 2.5?

If so I will take them.........how much posted?

Is the stormwerks knob 6 speed?

Thanks

I've just posted some more info about the ARBs on a new thread, here:

http://www.z4-forum.com/forum/viewtopic.php?f=7&t=49203

Hope it helps!

 

[lunster]

hi Im interested in the rear bumper plus pdc, do you have any pictures?

 

[mrlozzer]

hi Im interested in the rear bumper plus pdc, do you have any pictures?

The bumper is still in the bodyshop as it is safer there than in my garage! I'll pop there tomorrow and take some photos but I can tell you that it has been freshly painted so it's like new. I've got the parking sensors and all of the other kit (module, loom, gong) here, so I'll take a photo of them tomorrow and post that too.

 

[andysat]

Sorry, off subject but are the storm handbrake lever and button difficult to fit?-i have a v1 and toyed with the idea of doing the set sometime-thanks

 

[mrlozzer]

Sorry, off subject but are the storm handbrake lever and button difficult to fit?-i have a v1 and toyed with the idea of doing the set sometime-thanks

Not sure... I never got round to fitting them, as I went for an illuminated ZHP one instead. By the look of it it shouldn't be too tricky. The handbrake cover seems to fix on with three allen key grub screws and the button with one.

 

[andysat]

Cheers mate! -i had heard the buttons were a bit of a faff to fit.

 

[mrlozzer]

hi Im interested in the rear bumper plus pdc, do you have any pictures?

Just added a photo of the parts to the original post - I'll try to get a photo of the bumper itself tomorrow... thanks

 

[mrlozzer]

hi Im interested in the rear bumper plus pdc, do you have any pictures?

Hi. I've just posted a photo of the bumper into the original post - if you need any more info, give me a shout...

 

[bedminsterbob]

Hi where is the item located for collection

 

[mrlozzer]

Hi where is the item located for collection

Hi, I'm near Abergavenny in South Wales... thanks

 

[bedminsterbob]

Hi I am interested in the parts just have to check in work tomorrow if any of the lads that travel over from wales to site are from your area so I can get it collected.

 

[mrlozzer]

Hi. Not a problem... depending on the day (a day when I can use my wife's car) I can meet them anywhere near Newport / Chepstow / Monmouth / Cardiff / Merthyr if you're happy to bung us a few quid for my fuel.... if that helps you at all.

 

[mrlozzer]

Any takers on this? I may be willing to split the bumper and the PDC retrofit kit if anyone is interested... getting very close to garage clearout day and I'll be really upset to have to chuck away a freshly painted bumper...

 

[Tommy_C]

I wish you weren't exiled in wales or I'd have had this instantly mate

It's a steal!

 

[mrlozzer]

I wish you weren't exiled in wales or I'd have had this instantly mate

It's a steal!

Yeah, I know!! Someone relatively close must be interested, surely? Parking sensors alone have got to be worth more... I'd happily send, if I could find a box big enough, but no courier company provides cover for bumpers...