Hi all,
My 2011 E89 runs well, and no check engine light is showing. However if I plug in my generic (Stoga) ELM327 widget, Car Scanner Pro on my iPhone lists quite the range of fault codes. I've recently had the car's battery changed and recalibrated, as I was seeing some other weird behaviour, but the following codes persist after clearing all diagnostic codes:
SRS/Airbag
C947 -- "Status: Pending fault present during this drive cycle. Validated fault present at time of request."
High beam assist
A7C8, E0C4, E0C7, E0D4, E0D5, E0D6, E0D7, E0D8, E0D9, E0DA, E0DB, E0DC -- all with a blank/unknown status.
Climate/heater/Air conditioning
E72E -- "Status: Test conditions are met. Validated fault present at time of request."
The app I use unhelpfully just suggests I search for these codes online, and I'm not finding anything conclusive when I do so. That said, I suspect the codes for high beam assist are spurious -- perhaps the app is simply misunderstanding the response that it's getting from that module.
When I took my car into an independent BMW specialist for a different issue recently, their own reader only reported the C947 fault, describing it as "(multiple restraint system; K-CAN communication fault)". The mechanics suggested that it's not something to worry about, although it makes me a little uneasy seeing a persistent fault code in a safety module. The aircon one also intrigues me, though again it seems to be working fine.
Any thoughts/advice?
Stuart.
My 2011 E89 runs well, and no check engine light is showing. However if I plug in my generic (Stoga) ELM327 widget, Car Scanner Pro on my iPhone lists quite the range of fault codes. I've recently had the car's battery changed and recalibrated, as I was seeing some other weird behaviour, but the following codes persist after clearing all diagnostic codes:
SRS/Airbag
C947 -- "Status: Pending fault present during this drive cycle. Validated fault present at time of request."
High beam assist
A7C8, E0C4, E0C7, E0D4, E0D5, E0D6, E0D7, E0D8, E0D9, E0DA, E0DB, E0DC -- all with a blank/unknown status.
Climate/heater/Air conditioning
E72E -- "Status: Test conditions are met. Validated fault present at time of request."
The app I use unhelpfully just suggests I search for these codes online, and I'm not finding anything conclusive when I do so. That said, I suspect the codes for high beam assist are spurious -- perhaps the app is simply misunderstanding the response that it's getting from that module.
When I took my car into an independent BMW specialist for a different issue recently, their own reader only reported the C947 fault, describing it as "(multiple restraint system; K-CAN communication fault)". The mechanics suggested that it's not something to worry about, although it makes me a little uneasy seeing a persistent fault code in a safety module. The aircon one also intrigues me, though again it seems to be working fine.
Any thoughts/advice?
Stuart.